Hi We are experiencing an issue with one of our newer clusters. We have a few clusters added into Harvest and only this one is causing an issue. The problem is it will stop running after various amounts of time - usually 5-15 minutes. We see this on the NAbox web interface, home section under Harvest Systems. The cluster in question is showing Not Running in red. Once manually started it will run for another moment to fail again. NetApp Release 9.12.1P7 NAbox 2.6.3 (2020-05-05). NMSDK 9.7P1. Harvest 1.6. The below log shows me restarting the service twice today, however, there is no errors indicating what is causing it to stop. [2024-05-08 14:57:40] [NORMAL ] WORKER STARTED [Version: 1.6] [Conf: netapp-harvest.conf] [Poller: **********] [2024-05-08 14:57:40] [NORMAL ] [main] Poller will monitor a [FILER] at [**********:443] [2024-05-08 14:57:40] [NORMAL ] [main] Poller will use [password] authentication with username [netapp-harvest] and password [**********] [2024-05-08 14:57:40] [WARNING] [connect] Setting HTTP/1.0 because reverse hostname resolution (IP -> hostname) fails. To enable HTTP/1.1 ensure reverse hostname resolution succeeds. [2024-05-08 14:57:40] [WARNING] [connect] Setting HTTP/1.0 because reverse hostname resolution (IP -> hostname) fails. To enable HTTP/1.1 ensure reverse hostname resolution succeeds. [2024-05-08 14:57:40] [NORMAL ] [main] Collection of system info from [**********] running [NetApp Release 9.12.1P7] successful. [2024-05-08 14:57:40] [NORMAL ] [main] Found best-fit monitoring template (older generation or major release): [cdot-9.6.0.conf] [2024-05-08 14:57:40] [NORMAL ] [main] Added and/or merged monitoring template [/opt/netapp-harvest/template/default/cdot-9.6.0.conf] [2024-05-08 14:57:40] [NORMAL ] [main] Metrics will be submitted with graphite_root [**********] [2024-05-08 14:57:40] [NORMAL ] [main] Using graphite_meta_metrics_root [**********] [2024-05-08 14:57:40] [NORMAL ] Creating output plugins [2024-05-08 14:57:40] [NORMAL ] Created output plugins [2024-05-08 14:57:40] [NORMAL ] [main] Startup complete. Polling for new data every [60] seconds. [2024-05-08 17:03:02] [NORMAL ] WORKER STARTED [Version: 1.6] [Conf: netapp-harvest.conf] [Poller: **********] [2024-05-08 17:03:02] [NORMAL ] [main] Poller will monitor a [FILER] at [**********:443] [2024-05-08 17:03:02] [NORMAL ] [main] Poller will use [password] authentication with username [netapp-harvest] and password [**********] [2024-05-08 17:03:02] [WARNING] [connect] Setting HTTP/1.0 because reverse hostname resolution (IP -> hostname) fails. To enable HTTP/1.1 ensure reverse hostname resolution succeeds. [2024-05-08 17:03:02] [WARNING] [connect] Setting HTTP/1.0 because reverse hostname resolution (IP -> hostname) fails. To enable HTTP/1.1 ensure reverse hostname resolution succeeds. [2024-05-08 17:03:03] [NORMAL ] [main] Collection of system info from [**********] running [NetApp Release 9.12.1P7] successful. [2024-05-08 17:03:03] [NORMAL ] [main] Found best-fit monitoring template (older generation or major release): [cdot-9.6.0.conf] [2024-05-08 17:03:03] [NORMAL ] [main] Added and/or merged monitoring template [/opt/netapp-harvest/template/default/cdot-9.6.0.conf] [2024-05-08 17:03:03] [NORMAL ] [main] Metrics will be submitted with graphite_root [**********] [2024-05-08 17:03:03] [NORMAL ] [main] Using graphite_meta_metrics_root [**********] [2024-05-08 17:03:03] [NORMAL ] Creating output plugins [2024-05-08 17:03:03] [NORMAL ] Created output plugins [2024-05-08 17:03:03] [NORMAL ] [main] Startup complete. Polling for new data every [60] seconds. -------------- The [WARNING] [connect] messages are visible on the other clusters which work fine so I skipped investigating those. Are there other places in the logs that could be checked? Regards
... View more
Question about Active IQ Unified Manager Version: 9.14 Does anyone have an idea on how we might go about creating a notification on these two events: wafl.vol.autoSize.done wafl.vol.autoSize.fail We use auto grow throughout our environment and are reliant on getting notified each time a volume grows so that we can manage our volume autosize settings to make sure that volumes can continue to grow.
... View more
Hi Guys, I have several cluster mode nodes that have been successfully added to Active IQ Unified Manager to be monitored. Can I do the same for the 7 mode nodes? This 7 mode is the last of its kind but I still want to monitor the system. I have been trying but so far no luck. Maybe I configure it incorrectly. Below are my deployment: Active IQ Unified Manager version -> 9.13P1 7-Mode node version -> 8.1.4 7-Mode Netapp version -> FAS3220 Please advise. Thank you.
... View more
Hello All, because we have more Active IQUM installed in more customers, I ask you if have find the possibility to personalize Object on email alert. I don't have finded. Many thanks.
... View more
Hello, I have installed and configured 'OnCommand Plugin 4.3.1' on the SCOM Root Management Server and imported the Management Packs in SCOM Version 2022. I added the storage controllers successfully and many objects got discovered like Clusters, Nodes, Lifs, Disks ans so on. But unfortunately No LUNs and Volumes get discovered. Any help is really appreciated! Greetings from Germany
... View more
