2017-07-31 09:56 PM
Data ONTAP 8.2.3 7-mode simulator
Data ONTAP 8.2.3 7-mode simulator registered in ESXi 6.0.0.
After executing the command below, it restarted.
I chose (4) in the special boot menu.
However, it repeats restart.
Is there a solution?
０）Console login with ssh connection.
Tue Aug 1 22:13:04 JST 2017
NetApp Release 8.2.3 7-Mode: Thu Jan 15 21:30:45 PST 2015
on823> priv set advanced
Warning: These advanced commands are potentially dangerous; use
them only when directed to do so by NetApp
on823*> useradmin diaguser unlock
on823*> useradmin diaguser password
Enter a new password:
Enter it again:
Data ONTAP/amd64 (on823) (pts/0)
only when directed to do so by support personnel.
２）Remove Disk v0* & v1*
on823% cd /sim/dev/,disks
on823% vsim_makedisks -h
on823% sudo rm v0*
on823% sudo rm v1*
on823% sudo rm ,reservations
on823% sudo vsim_makedisks -n 14 -t 36 -a 0
on823% sudo vsim_makedisks -n 14 -t 36 -a 1
on823% sudo vsim_makedisks -n 14 -t 36 -a 2
on823% sudo vsim_makedisks -n 14 -t 36 -a 3
Solved! See The Solution
2 REPLIES 2
Re: Data ONTAP 8.2.3 7-mode simulator ESXi
2017-07-31 11:54 PM
After you rm ,reservations you need to cd ..
You should be in /sim/dev when you run vsim_makedisks, not in /sim/dev/,disks
You can also accomplish the same thing by stopping at the loader on the first boot and setting these:
setenv bootarg.sim.vdevinit "36:14:0,36:14:1,36:14:2,36:14:3" setenv bootarg.vm.sim.vdevinit "36:14:0,36:14:1,36:14:2,36:14:3"
You'll need to replace IDE1:1 with at least a 512GB disk first or it will eventually fill the /sim filesystem and panic.
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.