ONTAP Discussions

Disk assign issue on a vfiler

VICTOR_RODRIGUEZ_IBM
3,391 Views

Hi all:

I am having the following error when running the disk assign command in a LUN (from DS8000) presented to a Vfiler.

> disk assign SANFA02:6-7.140L34

disk assign: Assign failed because disk SANFA02:6-7.140L34 has non redundancy errors.

A total of 56 LUNs where presented but only 11 are having the issue. I have checked the LUNs on the DS8000 and they are online.

Any ideas?

4 REPLIES 4

scottgelb
3,391 Views

Does storage show disk -p have a missing second path for these 11 Luns?

VICTOR_RODRIGUEZ_IBM
3,391 Views

No. it doesn't. It is showing both paths for those 11 LUNs.

ibm_michael
3,391 Views
Data ONTAP 8.0.x and 8.1.x 7-Mode require two paths to an array LUN;more than two paths to an array LUN are not supported.         

https://kb.netapp.com/support/index?page=content&id=3012121

edmondweber
3,391 Views

Hello Victor and Hello all,

i have the same Problem. Have somebody found a solution for this.

Assign failed because disk has redundancy errors and force option not specified.

How can i verify how many Paths to the LUN the filer sees ?

By executing a "storage show disk -p", there are 2 Paths to each Disk shown.

Thanks,

Edmond

Public