I have a filer which is connected in ISCSI to a Hyper-Cluster.
Each node of Hyper-V has one NIC, in LAN which can join de ISCSI's filer.
When I launch a manual Takeover on Netapp, the cluster loose the ISCSI and the Virtual Machines shutdown. It doesn't reconnect to the ISCSI.
I also have a second ISCSI connected to an other server which contains data. When I run a takeover, the ISCSI shutdown but it reconnects after 40 seconds. It seems that the issue appears only for Hyper-V clusters.
My Luns's type are "Windows 2008 or later".
Have you an idea ?
7 REPLIES 7
It means that there are no multiple paths to the storage. Please check your network connections and LIF settings.Refer page 7 on the same link.
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Re: Failover ISCSI Cluster
2016-06-28 11:53 AM
You must set up MPIO from server side.