ONTAP Discussions

Looking for Nunber of Disks in Aggr and Number of disk shelves

dudu_zbeda
9,925 Views

Hi,

i'm looking for the follwoing commands

 

1.Verify the number of disks in Aggr ?

2.Verify the Number fo Disk shelves i have in the project

3.Verify the loop connection between the neapp ports and shelves

 

 

Thanks

2 REPLIES 2

sinhaa
9,925 Views

Hello dudu.zbeda,

   

try the following commands:

On 7-mode ( ONTAP version 7.3.x)

f3170-184-92> aggr status -r
Aggregate aggr0 (online, raid4, parity uninit'd!) (block checksums)
  Plex /aggr0/plex0 (online, normal, active)
    RAID group /aggr0/plex0/rg0 (normal, block checksums)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      parity    0a.32   0a    2   0   FC:A   -   ATA  5400 274400/561971200  274540/562258784
      data      0a.33   0a    2   1   FC:A   -   ATA  5400 274400/561971200  274540/562258784

Aggregate TestAggr2 (online, raid_dp, parity uninit'd!) (block checksums)
  Plex /TestAggr2/plex0 (online, normal, active)
    RAID group /TestAggr2/plex0/rg0 (normal, block checksums)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      dparity   0a.34   0a    2   2   FC:A   -   ATA  5400 274400/561971200  274540/562258784
      parity    0a.35   0a    2   3   FC:A   -   ATA  5400 274400/561971200  274540/562258784
      data      0a.36   0a    2   4   FC:A   -   ATA  5400 274400/561971200  274540/562258784

Aggregate TestAggr1 (online, raid4, parity uninit'd!) (block checksums)
  Plex /TestAggr1/plex0 (online, normal, active)
    RAID group /TestAggr1/plex0/rg0 (normal, block checksums)

      RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
      --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
      parity    0a.37   0a    2   5   FC:A   -   ATA  5400 274400/561971200  274540/562258784
      data      0a.38   0a    2   6   FC:A   -   ATA  5400 274400/561971200  274540/562258784 (prefail)


Spare disks (empty)

Partner disks

RAID Disk       Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
---------       ------  ------------- ---- ---- ---- ----- --------------    --------------
partner         0a.44   0a    2   12  FC:A   -   ATA  5400 0/0               274540/562258784
partner         0a.39   0a    2   7   FC:A   -   ATA  5400 0/0               274540/562258784
partner         0a.40   0a    2   8   FC:A   -   ATA  5400 0/0               274540/562258784
partner         0a.42   0a    2   10  FC:A   -   ATA  5400 0/0               274540/562258784
partner         0a.43   0a    2   11  FC:A   -   ATA  5400 0/0               274540/562258784
partner         0a.45   0a    2   13  FC:A   -   ATA  5400 0/0               274540/562258784
partner         0a.41   0a    2   9   FC:A   -   ATA  5400 0/0               274540/562258784
f3170-184-92>

f3170-184-92> storage show
Slot:            0a
Description:     Fibre Channel Host Adapter 0a (QLogic 2432 rev. 2)
Firmware Rev:    5.4.0
FC Node Name:    5:00a:098200:2513f2
FC Port Name:    5:00a:098200:2513f2
FC Packet Size:  2048
Link Data Rate:  2 Gbit
SRAM Parity:     Yes
External GBIC:   No
State:           Enabled
In Use:          Yes
Redundant:       No

Slot:            0b
Description:     Fibre Channel Host Adapter 0b (QLogic 2432 rev. 2)
Firmware Rev:    5.4.0
FC Node Name:    5:00a:098300:2513f2
FC Port Name:    5:00a:098300:2513f2
FC Packet Size:  2048
Link Data Rate:  4 Gbit
SRAM Parity:     Yes
External GBIC:   No
State:           Enabled
In Use:          Yes
Redundant:       No

Slot:            0c
Description:     Fibre Channel Host Adapter 0c (QLogic 2432 rev. 2)
Firmware Rev:    5.4.0
FC Node Name:    5:00a:098000:2513f2
FC Port Name:    5:00a:098000:2513f2
FC Packet Size:  2048
Link Data Rate:  N/A
SRAM Parity:     Yes
External GBIC:   No
State:           Disabled
In Use:          No
Redundant:       Yes

Slot:            0d
Description:     Fibre Channel Host Adapter 0d (QLogic 2432 rev. 2)
Firmware Rev:    5.4.0
FC Node Name:    5:00a:098100:2513f2
FC Port Name:    5:00a:098100:2513f2
FC Packet Size:  2048
Link Data Rate:  N/A
SRAM Parity:     Yes
External GBIC:   No
State:           Disabled
In Use:          No
Redundant:       Yes

No hubs found.

No expanders found.

DISK                  SHELF BAY SERIAL           VENDOR   MODEL      REV
--------------------- --------- ---------------- -------- ---------- ----
0a.32                   2    0  A826Z0PE         NETAPP   X266_MTOMC R5VV
0a.33                   2    1  A826NHRE         NETAPP   X266_MTOMC R5VV
0a.34                   2    2  A826X41E         NETAPP   X266_MTOMC R5VV
0a.35                   2    3  A827B15E         NETAPP   X266_MTOMC R5VV
0a.36                   2    4  A827H3NE         NETAPP   X266_MTOMC R5VV
0a.37                   2    5  A826WP2E         NETAPP   X266_MTOMC R5VV
0a.38                   2    6  A826Z97E         NETAPP   X266_MTOMC R5VV
0a.39                   2    7  A826ZE3E         NETAPP   X266_MTOMC R5VV
0a.40                   2    8  A827G0KE         NETAPP   X266_MTOMC R5VV
0a.41                   2    9  A826X3PE         NETAPP   X266_MTOMC R5VV
0a.42                   2   10  A826QFWE         NETAPP   X266_MTOMC R5VV
0a.43                   2   11  A827HP1E         NETAPP   X266_MTOMC R5VV
0a.44                   2   12  A82703QE         NETAPP   X266_MTOMC R5VV
0a.45                   2   13  A826ZCWE         NETAPP   X266_MTOMC R5VV

No bridges found.

SHARED STORAGE HOSTNAME   SYSTEM ID
------------------------- ----------
f3170-184-93              0151746519
f3170-184-92              0151746560 (self)
f3170-184-92>

This will provide all information you need.

Are you looking for Cmode commads as well?

I hope this helps.

warm regards,

Abhishek

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

scottgelb
9,925 Views

I also like "sysconfig -V" .. uppercase V will show all aggregates and number of disks per raid group in aggregate.  Saves time having to count the disks manually.

For shelves... sasadmin shelf or sasadmin expander_map for sas.. for ds14, fcadmin device_map.  With MPHA though you will see disk shelves twice.  From a sysconfig -a you can look at the disk serial numbers and search then see the path connections... myasup on the now site is also a nice way to see visualizaitons of all paths and alerts if any issues on pathing.

Public