2017-12-05 09:34 AM
I've been reading through all the documentation, including Update Advisor, regarding upgrade from 8.1 family to 8.2. Management would like this done by the end of the year, so initially I was going to update to the lates p10 for 8.1. After reading everything, it seems 8.2.3(or 5) is really the only way to go, 8.1 is old and no longer supported.
While the documentation is pretty comprehensive, I just wanted to throw this question out to the people in the trenches and ask what 'Gotchas' I might anticipate. From what I've read, it is much more involved that staying in the same revision family, and my plan was to update the Management software (SnapManager, SnapDrive, etc) much earlier, as well as any firmware, to break up the migration in to digestible steps. I believe we can't do nondisruptive update, as we run CIFS for our drive shares. Is this assumption correct?
Any thoughts on your experience is greatly appreciated!
Solved! SEE THE SOLUTION
2017-12-05 12:10 PM
You might want to consider 8.2.4 P6 instead, especially if you need to do this by 12/31, simply because there's a known bug people are running into on 8.2.5 (see below):
There should be a P1 release for 8.2.5 at some point but it may not be available by 12/31.
CIFS is the only outage you should experience (unless you do CIFS via Hyper-V in which case there's no outage). Your plan sounds about right - upgrade software to the compatibile version first, then upgrade the OS.
2017-12-05 08:40 PM