Data ONTAP Discussions

NETAPP and Recent SMB1 Issues

Can anyone point me to any offical NETAPP responses to the SMB1 discussed here:

 

https://whyistheinternetbroken.wordpress.com/2017/02/22/smb1-vuln-ontap/

 

I am not in a postion today to move to ONTAP 9.2 and disable SMB1.  However our

security scanner are reporting this daily now.

 

If I can quota an offical response from NETAPP stating its SMB1 is not vulnerable then

I can get  a risk acceptance to cover the scan failures until I upgrade to 9.2.

8 REPLIES 8

Re: NETAPP and Recent SMB1 Issues

For a conclusive answer it would help to know exactly is the scanner reporting.

 

In the mean time, you might find this helpful:

https://kb.netapp.com/support/s/article/NTAP-20170515-0001

Re: NETAPP and Recent SMB1 Issues

Thanks, you reply was very useful.  This is the Nessus link.

 

http://www.tenable.com/plugins/index.php?view=single&id=96982

 

 

Highlighted

Re: NETAPP and Recent SMB1 Issues

Thanks for the info on the generic "disable SMBv1" warning.

 

As of today (7/12/2017) it is not completely possible to disable SMBv1 for client access on any version of ONTAP other than 9.2. However, there are plans to add that capability to an existing LTS 9.x release and an upcoming 7-Mode release as well.

Re: NETAPP and Recent SMB1 Issues

ONTAP version 8.2.5 (7-Mode only) posted today and adds the ability to disable SMBv1 server and client.

Re: NETAPP and Recent SMB1 Issues

How do you disable smb v1?  i see option to enable V2 but not disable v1.

Re: NETAPP and Recent SMB1 Issues

See release notes for 8.2.5

 

https://library.netapp.com/ecmdocs/ECMLP2760543/html/frameset.html

 

cifs control set

 

 

Re: NETAPP and Recent SMB1 Issues

thanks.  per the release notes,  the command to disable smb v1 in 8.2.5 7mode is

 

filer> cifs control set smb1.enable no

 

in conjunction with this

 

filer> options cifs.smb2.enable on

 

and i can confirm that this allows nessus scans to pass for the cifs protocol

Re: NETAPP and Recent SMB1 Issues

Does anyone know of a way to track what clients are making SMB1 connections?  We would prefer to idetify them and remove them from the environment rather than just disabling SMB1 on the NetApp and breaking any old printers that are still using it.  The cifs session command shows the clients, but it is a point in time, so if they are not actively connected when the command is run, they will not show up.

 

cifs session show -protocol-version smb1 -fields address

I attempted to use the statistics command, but it only shows me numbers of connections (from what I could find), not the specific clients that the connections were coming from.

Any suggestions?

Forums