ONTAP Discussions

Netapp Volume Not Showing correct used size.....

AMIR_JABRAN
6,392 Views

Hi dear

I have FAS2240-2 , i have created two Volumes of 1 TB for my netbackup DSU's , and mapped them using iscsi into my backup server... and configure DSU01 and DSU02 for them.

Now on netapp its shows its 98% full and other one is 90% full, but when i log on to backup server and check the mapped drive status, its shows different and it is quite 70% full.

Dont know whats the issue is.

Kindly guide me what to do.

Regards

M.Amir

7 REPLIES 7

saranraj456
6,392 Views

Pls share df -s & df -h of the volume

AMIR_JABRAN
6,392 Views

Hi,

controller01> df -s

Filesystem                used      saved       %saved

/vol/vol0/             3235984          0           0%

/vol/Backupvol01/  971243040  104625984          10%

/vol/Backupvol03/ 1049174832    9650580           1%

YEKYAWTHARMYINT
6,392 Views

Hi Amir,

I believe you have created the Thick LUN. Means you LUN is physically allocated the space. That's why form you storage level (volume) show 98% and 90% full.

Regards,

Ye

AMIR_JABRAN
6,392 Views

hi,

Volumes 0r LUN's are thin Provison not thick

Regards,

Muhammad Amir Jabran Ansari

Sr System Engineer | Information Technology

saranraj456
6,392 Views

df -h output

AMIR_JABRAN
6,392 Views

controller01> df -h

Filesystem               total       used      avail capacity  Mounted on

/vol/Backup01/     1024GB      854GB      169GB      83%  /vol/Backup01/

/vol/Backup01/.snapshot        0TB        0TB        0TB     ---%  /vol/Backup01/.snapshot

/vol/Backup03/     1024GB      917GB      106GB      90%  /vol/Backup03/

/vol/Backup03/.snapshot        0TB        0TB        0TB     ---%  /vol/Backup03/.snapshot

Regards,

Muhammad Amir Jabran Ansari

Sr System Engineer | Information Technology

saranraj456
6,392 Views

What is the occupied size shown in lun show -v output ?

I believe Fractional reserve is been used for the residue space ,vol options will clear the doubt

Public