ONTAP Discussions
ONTAP Discussions
Hi
FAS8020, 8.2.4P6, 7-mode
I've created my SnapVault destination volumes using the following method:
vol create sv_ca_testvol -s none aggr0 94g |
snap sched sv_ca_testvol 0 0 0 |
snap reserve sv_ca_testvol 0 |
sis on /vol/sv_ca_testvol |
sis config -C true -I true /vol/sv_ca_testvol |
sis config -s manual /vol/sv_ca_testvol |
tr-3958 says this:
The manual schedule is an option for SnapVault destinations only. By default if deduplication and postprocess compression are enabled on a SnapVault destination it will automatically be started after the transfer completes. By configuring the postprocess compression and deduplication schedule to manual it prevents deduplication metadata from being created and stops the postprocess compression and deduplication processes from running.
Why am I not seeing any inline compression or deduplication savings on the SnapVault destination volumes?
Thanks
Solved! See The Solution
Thanks for the reply but the informaiton you pointed me to tells me what I already know. I asked why deduplicaiton/compression wasn't working on my SV destination volumes based on the configuration parameters I listed in my initial post (following the directions in TR-3598)
After raising a case with NetApp it appears that the TR is incorrect, the sis schedule should be set to '-'
sis on /vol/sv_ca_testvol |
sis config -C true -I true /vol/sv_ca_testvol |
sis config -s - /vol/sv_ca_testvol |
Hi,
Please refer page 58 of TR: https://www.netapp.com/us/media/tr-3966.pdf
Thanks for the reply but the informaiton you pointed me to tells me what I already know. I asked why deduplicaiton/compression wasn't working on my SV destination volumes based on the configuration parameters I listed in my initial post (following the directions in TR-3598)
After raising a case with NetApp it appears that the TR is incorrect, the sis schedule should be set to '-'
sis on /vol/sv_ca_testvol |
sis config -C true -I true /vol/sv_ca_testvol |
sis config -s - /vol/sv_ca_testvol |