ONTAP Discussions

The speed of c-mode vol move...

nachin
4,022 Views

I know the speed of c-mode vol move can actually depend on the loading of the source and destination aggregate, and possibly on the interconnect switch as well. I have been searching around but did not find any documentation describing the speed of a vol move operation. Assuming very low loading in controllers and aggregates, what is the typical throughput of a vol move operation? If this vol move go across cluster interconnect, will it have a very different throughput from that within the same controller?

 

Any replication would be appreciated, thank you.

1 ACCEPTED SOLUTION

Sahana
4,002 Views

Hi,

 

You can check teh status using vol move show. Refer https://library.netapp.com/ecmdocs/ECMLP2348025/html/volume/move/show.html

Refer TR http://www.netapp.com/us/media/tr-4075.pdf for the best practices.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

1 REPLY 1

Sahana
4,003 Views

Hi,

 

You can check teh status using vol move show. Refer https://library.netapp.com/ecmdocs/ECMLP2348025/html/volume/move/show.html

Refer TR http://www.netapp.com/us/media/tr-4075.pdf for the best practices.

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Public