ONTAP Discussions

Upgrade Ontap 8.3 to Ontap 9 root-data-data partition

PeterMekes
5,409 Views

Hi,

 

I updated a new FAS 2552 ( All SSD ) from 8.3.2 P2 to 9.oP1, after the update I initialized the system.

I was hoping dat I could create an aggregate with the root-data-data partitioning method so I get 2 aggregates both the same size next to the Root partitions.

 

( http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-hacg%2FGUID-4E031540-57DB-41E8-AA4A-45466D59B7D2.html )

 

But unfortionally I was unable to do so, anybody know the solution  ?

 

Thanks

 

1 ACCEPTED SOLUTION

aborzenkov
5,379 Views

How did you reinitialize controllers? You need to remove ownership from all disks (and current partitions) before starting it.

View solution in original post

7 REPLIES 7

aborzenkov
5,399 Views

As far as I know root-data-data is used only for SSD disks.

PeterMekes
5,388 Views

 

aborzenkov
5,380 Views

How did you reinitialize controllers? You need to remove ownership from all disks (and current partitions) before starting it.

PeterMekes
5,375 Views

 

I reinitialize the controllers without removing ownership and partitions.

 

 

 

So next step would be booting in maintanance mode and removing ownership and partitions ( if the exists ) and start a new initialize ( Option 4)  ?

 

 

PeterMekes
5,311 Views
 
 
I removed all the partitions and ownership of the disks, and after a initialize I can create aggregates with root-data-data.
 
Thanks.

aborzenkov
5,304 Views

Good. Congratulations!

thomasb82
5,137 Views

Would be nice to get an option to repartition without losing data and all that (un)assigning.

 

Most partitioning tools can do that, so it shouldn't be that complicated to implement, right?!

 

Thanks!

Public