ONTAP Discussions

arp: writing to routing socket: File exists Since upgraded to ONTAP 8.1.4

jerome_barrelet
9,641 Views

Hello,

Since we upgraded to ONTAP 8.1.4 7-mode we have these messages in console.

arp: writing to routing socket: File exists

They don't appear in the messages log file but only in console. Seems that it comes from the ACP upgrade Fwd.

As anyone had the same ?

ACP is working well:

Alternate Control Path:  Enabled

Ethernet Interface:      e4b

ACP Status:              Active

ACP IP Address:          192.168.0.123

ACP Subnet:              192.168.0.0

ACP Netmask:             255.255.252.0

ACP Connectivity Status: Full Connectivity

Shelf Module      Reset Cnt    IP Address      FW Version   Module Type  Status

----------------- ------------ --------------- ------------ ------------ -------

1a.00.A           000          192.168.2.219   01.41        IOM3         active

1a.00.B           000          192.168.2.229   01.41        IOM3         active

1a.01.A           000          192.168.3.231   01.41        IOM3         active

1a.01.B           000          192.168.0.216   01.41        IOM3         active

1a.02.A           000          192.168.1.61    01.41        IOM3         active

1a.02.B           000          192.168.2.33    01.41        IOM3         active

1a.03.A           000          192.168.0.82    01.41        IOM3         active

1a.03.B           000          192.168.0.115   01.41        IOM3         active

1a.04.A           000          192.168.0.168   01.41        IOM3         active

1a.04.B           000          192.168.0.231   01.41        IOM3         active

Regards

Jerome

9 REPLIES 9

jameshowarth
9,448 Views

We get the same message on my FAS2040 console after upgrading to 8.1.4.7-mode on December 18, 2013.

arp: writing to routing socket: File exists

Everything else seems fine.

~James

jerome_barrelet
9,448 Views

Hello,

Here is the answer of the support :

Unfortunately it seems that you have ran into a known issue reported in Internal Case 723742 and caused by Internal Case number 640594.

reported in Internal Case: http://support.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=723742

caused by Internal Case: http://support.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=640594

As usual nothing public in this Burt

Jerome

csanchez_netapp
9,448 Views

Hello,

This issue just have been solved with DOT 8.1.4P1:

"http://support.netapp.com/NOW/download/software/ontap/8.1.4P1/"

Regards.

TEJA_NETAPP
9,448 Views

Hello,

We are using DOT 8.1.4P1 on FAS 3220 systems and this problem is still occurring. I can still see messages on the console  arp: writing to routing socket: File exists.

Is there any workaround for this?

Thanks,

Ravi.

jerome_barrelet
9,448 Views

Have you tried an options acp.enabled off , wait  a min and acp.enabled on

It worked for me.

Jerome

brauntisc
9,448 Views

Today we have updated our FAS6210 to 8.1.4P1. Since the update the Message "arp: writing to routing socket: File exists" is gone..

regards

Thomas

jkrauss2002
9,448 Views

I just upgraded a FAS6210 to 8.1.4P2 and still received the message.  However, I used the suggestion to cycle the ACP and it appears to have stopped the messages.

CHRISTOPH_LOEHR
9,448 Views

Also an issue in 8.1.4P4,

we just upgraded from 8.1.2 to 8.1.4P4 and got this messages.

Chelydridae
8,318 Views

Upgraded FAS2240-2 from 8.1.4 to 8.2.3 and got this message.

options acp.enabled off

acpadmin configure

 

made it go away

Public