Hello,   We have FAS2520 with two nodes, unfortunately the one node is down.  below is the result of cluster show -node command Node: XXXX-NODE01 Eligibility: true Health: false   All shares and datastore are still available now. how can we bring this node back up? and how to identify the root cause of this issue? we have receive this alert when the issue happen: System Alert from SP of XXXX-NODE01 (REBOOT (watchdog reset)) CRITICAL   Thanks for your answer and help   ... View more

I have FAS270 which has 1 tray externally attached to the controllers. These are 7 TB drives.   I have install using ADP but don't quite seem to be able to control which drives belong to which nodes cluster-01::> aggr show -aggregate aggr0_netapp_stk_cluster_01_01 -fields disklist aggregate disklist ------------------------------ ----------------------------------------------------------------------------------------------------------------------------------------------- aggr0_netapp_stk_cluster_01_01 1.0.1,1.0.3,1.0.5,1.0.7,1.0.9,1.0.11,1.0.13,1.0.15,1.0.17,1.0.19,1.0.21,1.0.23,1.3.1,1.3.3,1.3.5,1.3.7,1.3.9,1.3.11,1.3.13,1.3.15,1.3.17,1.3.19   cluster-01::> aggr show -aggregate aggr0_netapp_stk_cluster_01_02 -fields disklist aggregate disklist ------------------------------ ----------------------------------------------------------------------------------------------------------------------------------------------- aggr0_netapp_stk_cluster_01_02 1.0.0,1.0.2,1.0.4,1.0.6,1.0.8,1.0.10,1.0.12,1.0.14,1.0.16,1.0.18,1.0.20,1.0.22,1.3.0,1.3.2,1.3.4,1.3.6,1.3.8,1.3.10,1.3.12,1.3.14,1.3.16,1.3.18 netapp-stk-cluster-01::> As you can see I have 0dd number disk on node A and even on Node B  Tray 0  -1.0.x Tray 3  - 1.3.x I would rather have 1.0.0 - 23 on node A and 1.3.0-23 on node B. I might get fairly good performance but should Node B go down then what happens to the aggregate and data should that occur. These same questions should I introduce Flexgroup in same manner.  I would have same issue. 7 TB x 24 is 168 per tray so that 326 TB of capacity especially when performing upgrades? I appreciate it any feedback ... View more

Hello. I have a question.   We are going to renew FAS 2750 for a project. 1. Now we have 15TB volume. 2.The license to be applied will be ordered in core bundle, so snap mirror will not be available. 3. How can I safely migrate ? ... View more

Hello, I'am searching for a working solution to upload the configuration files from the Netapp to a https destination. I have tested with webdav on IIS and apache 2.4 on Windows. On IIS, I get a 405 error, when I try to upload a file, because the POST method is not allowed. On Apache 2.4 I have also created a webdav server with ssl enabled. When I mount the webdav ressource as a network drive in Windows, everything works fine, I can upload and download files without a problem. If I try to upload a configuration file with system configuration upload on the Netapp then I get the error 404 - file not found.  In the case, a file with the same name is already there, the Netapp says that the file was uploaded. But the file was not written. The same webserver configuration with http works fine. In the log-files I can see, that on the Netapp the POST method was used. The upload over a mounted drive on Windows uses the PUT Method.   Thank you in advance, best regards Matthias   ... View more

device: NetApp A220   In our staging environment, I ran through the initial  management network configure via the USB connected console, then configured the everything else via the web portal (data NICs, SVM, first LUN). I did this in order to document the process for production.   I realize that there is way to reset the configuration and wipe the disks in a secure way. There is no sensitive data on the SAN. Is there any way to get the configuration back to the way I received it initially without requiring a secure wipe of the disks (hours of unnecessary zerorizing). i.e., I would like to use the exactly same steps I followed when I first configured the device to deploy it in production as it will be an audited process.   I found this link that seems to be ok but I heard in some situations resetting to factory config leaves the SAN in a state that is not always the way the vendor shipped it e.g., licenses may be preloaded from the vendor:  https://dailysysadmin.com/KB/Article/8724/how-to-wipe-or-decommission-a-netapp-san-to-clear-config-and-wipe-or-zero-disks/ thanks in advance! Marcus ... View more