Do you know of any other methods by which we can monitor our E-Series? There is no SCOM Management Pack, not ActiveIQ integration, etc.
So when we have a system/disk/etc. failure, we need to solely rely on the e-mail alerts that the SANtricity OS sends, which gets many times swallowed up with all of the other million mails we get per day.
Case automation and risks/health/wellness has been integrated into Active IQ Digital Advisor (formerly Active IQ). https://aiq.netapp.com There is a requirement to be sending back telemetry data, but that's available in all current version of SANtricity.
I don't have an E-Series in ActiveIQ to check, but I think ActiveIQ lets you configure email alerts in the Web UI.
Last time I checked (for SolidFire), it was possible, although not very friendly as one could enable email alerts for many different events and it wasn't clear what each of them meant. Maybe it's simpler for E-Series, and essential alerts (link or controller down, dead disk and similar errors) shoudn't be many.
We just receive hundreds of mails a day and it's quite easy (unfortunately) to miss a mail here and there. That's why we are looking for a real monitoring system integration so that the alert will never get closed or disappear until we take care of it.