FAS and Data ONTAP Articles and Resources

72C Utility - Convert 7-Mode Commands, Files, and Options to Clustered ONTAP

UPDATE:  July 18, 2014 updated CSV for ONTAP 8.2.1.  I also updated the HTA file but the only change was to make the link back to this forum post more visible.

 

Included in the 7-mode documentation is a command map to show how 7-mode commands map to their clustered equivalents.  This utility takes that data and presents it in another format with selection boxes and accompanying links for the man pages for each selection.

 

This utility requires two files 72C.hta and 72C.csv.  Put them in the same directory and launch the 72C.hta file.  Select what you want to work with on the left (i.e. commands, options, or files) and then you can select which specific one you want from the drop down box.  In the lower section it will then populate with details about the command and links to the man pages.

 

Note this is a Windows only utility.

 

Please post any comments for improvement here.

Please Note:

All content posted on the NetApp Community is publicly searchable and viewable. Participation in the NetApp Community is voluntary.

In accordance with our Code of Conduct and Community Terms of Use, DO NOT post or attach the following:

  • Software files (compressed or uncompressed)
  • Files that require an End User License Agreement (EULA)
  • Confidential information
  • Personal data you do not want publicly available
  • Another’s personally identifiable information (PII)
  • Copyrighted materials without the permission of the copyright owner

Continued non-compliance may result in NetApp Community account restrictions or termination.

Replies

Very nice

Saluting mcgue!

Henry

Very useful tool for the customer!

All Community Forums
Public