72C Utility - Convert 7-Mode Commands, Files, and Options to Clustered ONTAP

[mcgue]

UPDATE:  July 18, 2014 updated CSV for ONTAP 8.2.1.  I also updated the HTA file but the only change was to make the link back to this forum post more visible.

Included in the 7-mode documentation is a command map to show how 7-mode commands map to their clustered equivalents.  This utility takes that data and presents it in another format with selection boxes and accompanying links for the man pages for each selection.

This utility requires two files 72C.hta and 72C.csv.  Put them in the same directory and launch the 72C.hta file.  Select what you want to work with on the left (i.e. commands, options, or files) and then you can select which specific one you want from the drop down box.  In the lower section it will then populate with details about the command and links to the man pages.

Note this is a Windows only utility.

Please post any comments for improvement here.

[scottgelb]

Very nice

[HENRYPAN2]

Saluting mcgue!

Henry

[Fonke]

Very useful tool for the customer!