ONTAP Hardware

Basic Question on FAS2020

jkoelker01
4,143 Views

how can one tell how much ram is installed on my fas2020 and also how much built in cache is on the filer? I also know there is one cpu in it but what is the speed of it? Trying to find commands or something to tell me this.

1 ACCEPTED SOLUTION

ralfaro01zero
4,143 Views

Type sysconfig -a on your filer's shell, it'll give you the information.

As default the FAS2020 comes with 1024MB of system memory and 128MB of NVRAM per controller, the processor is an Intel Celeron, I believe it is 2Ghz.

Cheers.

View solution in original post

3 REPLIES 3

ralfaro01zero
4,144 Views

Type sysconfig -a on your filer's shell, it'll give you the information.

As default the FAS2020 comes with 1024MB of system memory and 128MB of NVRAM per controller, the processor is an Intel Celeron, I believe it is 2Ghz.

Cheers.

jkoelker01
4,143 Views

Thanks for the quick response. That was exactly what I was looking for.

radek_kubka
4,143 Views
As default the FAS2020 comes with 1024MB of system memory and 128MB of NVRAM per controller

I believe NVRAM on 2020 uses part of system memory, so basically eats up into this 1GB.

I've never seen any official spec, but Wikipedia says 2020 has 2.2 GHz Mobile Celeron (http://en.wikipedia.org/wiki/NetApp_filer)

Regards,

Radek

Public