FAS2040 blowing Power Supplies

Hi all,


We have moved hardware from our Netherlands to Scotland site.  All equipment was working in NL and was powered down correctly and professionally transported.


Included in the move are 6x FAS2040.  So far all PSUs from 3 have blown on power up.


Any ideas?


Power Supplys fitted are CP-1103R2

Re: FAS2040 blowing Power Supplies



Is there an error message displayed? Check the following link which gives useful information about power supply issues.


Hope this helps.


If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.