I have 28 disk in DS14 shelves, which I need to migrate to DS14MK2...
Here is the list of disks, some do fit the MK2 and some do not, but I can't fins ANY ifnormation on how to tell if tehy fit without physicall removing them and check if the carrier has the "wide" slot or not. But I need to be able to find out without removing them!
But you might be right... I remember something about an A model not working mk2 but can't remember that long ago since these are really old drives... but the description lists they were mk2 supported. mk4 too which is odd.
What is the information in parts finder that tells me that the Disk Carrier is fitting into the MK2 shelf?
When I've tried to move them last week, I had to immediately revers and had no time/chance to get a complete look at the disks... So I need to find this out to 200% which ones I need to migrate with the "disk replace" command.
Yes, thats correct. I do have the impression that NetApp shipped some X274 in the "thinner" carrier and some in the "wider" carrier... Which makes it almost impossible to handle this situation... Correct?