So, I'm trying to setup the 2020, I current have RAID6 using 4 disks each off each controller. I'm trying to add 1 more disk to a raid/aggregate, but I dont see how in the GUI(there is a spot, but it doesnt see the spare disks) and I dont see any disk command in the cli. Thanks in advance!
disks are unowned... use "disk assign xx.xx.xx" to assign a disk to a node... or assign 2 to one node then "disk assign all" if you want to assign the 4 unowned evenly between both nodes...then you can add the drive. From the cli "aggr add aggrname 1"... although if data is on the aggr you could hit some performance constraints while the single disk is written to unless you run reallocate.