ONTAP Hardware

Peramanent IP address for management interface

SagarDH
2,593 Views

Hi Team,

 

We are using Netapp 8.1.4 7 mode nd when ever i reboot the storage I need to configure IP like below using console. Please help, How do i make this ip peramanently save

 

ifconfig e0b 10.10.10.100 netmask 255.255.255.0.

1 ACCEPTED SOLUTION

Sahana
2,582 Views

Hi,

 

Network configuration changes made by using the ifconfig command are not automatically included in the /etc/rc file. To make the configuration changes persistent after reboots, include the ifconfig command in the /etc/rc file. Refer KB https://kb.netapp.com/support/s/article/what-is-the-order-of-commands-in-the-etc-rc-file?language=en_US
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

View solution in original post

1 REPLY 1

Sahana
2,583 Views

Hi,

 

Network configuration changes made by using the ifconfig command are not automatically included in the /etc/rc file. To make the configuration changes persistent after reboots, include the ifconfig command in the /etc/rc file. Refer KB https://kb.netapp.com/support/s/article/what-is-the-order-of-commands-in-the-etc-rc-file?language=en_US
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Public