FAS and V-Series Storage Systems Discussions

Setup help

jelsco

Just Started a new job and was given the task "Rack and hookup this netapp stuff" No one here knows anything about it and this is my frist time with it.
4 units
FAS2220 (dual controller)

FAS2240-4 (single controller)

2- DS424x disk shelvs 

For all i know everything that was setup at one time is not here. Seems weird to have two controllers, am i able to just hook the 2240 just as another link along with the DS's?

I have attached a picture of how i have it racked, if someone could give insight to how you think it should all be connected. I do believe it was all connect with ethernet only, maybe fiber at the controllers. 

i have included the consol from the fas2222

Phoenix SecureCore(tm) Server
Copyright 1985-2008 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 8.1.0
Portions Copyright (c) 2008-2011 NetApp, Inc. All Rights Reserved

CPU = 1 Processors Detected, Cores per Processor = 2
Intel(R) Xeon(R) CPU           C3528  @ 1.73GHz
Testing RAM
512MB RAM tested
6144MB RAM installed
256 KB L2 Cache per Processor Core
4096K L3 Cache Detected
System BIOS shadowed
USB 2.0: MICRON eUSB DISK
BIOS is scanning PCI Option ROMs, this may take a few seconds...
 +++++++++++++++++++


Boot Loader version 4.1
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2011 NetApp

CPU Type: Intel(R) Xeon(R) CPU           C3528  @ 1.73GHz


Starting AUTOBOOT press Ctrl-C to abort...
Loading X86_64/freebsd/image2/kernel:0x100000/8450520 0x90f1d8/1278704 Entry at 0x801585d0
Loading X86_64/freebsd/image2/platform.ko:0xa48000/653264 0xb8d8e8/692592 0xae77e0/39304 0xc36a58/42192 0xaf1168/86252 0xb06254/63752 0xb15b60/140448 0xc40f28/158856 0xb38000/2016 0xc67bb0/6048 0xb387e0/304 0xc69350/912 0xb38910/1680 0xc696e0/5040 0xb38fa0/960 0xc6aa90/2880 0xb39360/184 0xc6b5d0/552 0xb39420/448 0xb64de0/12918 0xb8d7f8/237 0xb68058/83952 0xb7c848/69552
Starting program at 0x801585d0
NetApp Data ONTAP 8.1.2P2 7-Mode
Copyright (C) 1992-2012 NetApp.
All rights reserved.
md1.uzip: 26368 x 16384 blocks
md2.uzip: 4608 x 16384 blocks
*******************************
*                             *
* Press Ctrl-C for Boot Menu. *
*                             *
*******************************
Oct 14 18:33:09 [localhost:cf.nm.nicTransitionUp:info]: Interconnect link 0 is UP
Oct 14 18:33:10 [localhost:cf.rv.flush.handleExchange:info]: Flushing is active.
Cluster monitor: warning: firmware partner-sysid variable is not set
Oct 14 18:33:12 [localhost:cf.nm.nicTransitionDown:warning]: Cluster Interconnect link 0 is DOWN
Oct 14 18:33:12 [localhost:cf.rv.notConnected:error]: Connection for 'cfo_rv' failed.
Oct 14 18:33:15 [localhost:diskown.isEnabled:info]: software ownership has been WAabled for this system
Oct 1FL4 18:33 :15 [loCPcalhostLE:dcs.frDGameworkER.enable d:info]i: The DsCS fram eework inas enablbled on tedhis nod. e.
OChct 14 1ec8:33:15kl [localishost:cot nfig.no= Partner0Disks:Cx7RITICALff]: No r the pwe41re detefcted fof
artner; this node will be unable to takeover correctly
Oct 14 18:33:15 [localhost:callhome.dsk.config:warning]: Call home for DISK CONFIGURATION ERROR
Oct 14 18:33:15 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig'. The full command line is 'ifconfig lo 127.0.0.1'.
Oct 14 18:33:15 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv losk 127.0.20.1'.
Oct 14 18:33:15 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo 0'.
Oct 14 18:33:15 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. TPANIC  : raid: there are no data or parity disks
version: 8.1.2P2: Wed Feb 20 19:58:27 PST 2013
conf   : x86_64
cpuid = 0
Uptime: 38s

PANIC: raid: there are no data or parity disks in SK process rc on release 8.1.2P2 on Wed Oct 14 18:33:16 GMT 2015

version: 8.1.2P2: Wed Feb 20 19:58:27 PST 2013
compile flags: x86_64
Writing panic info to HA mailbox disks.
HA: current time (in sk_msecs) 17711 (in sk_cycles) 220546957837
DUMPCORE: START
No eligible disks found

DUMPCORE: END -- coredump *NOT* written.
Dumpcore failed
coredump: primary dumper failed -1.
coredump: trying secondary dumper...
no tftp server ip specified
netdump: no targets available to dump
coredump: secondary dumper failed -1.
Logging shutdown event to the SP...
System halting...
cpu_reset called on cpu#0

Phoenix SecureCore(tm) Server
Copyright 1985-2008 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 8.1.0
Portions Copyright (c) 2008-2011 NetApp, Inc. All Rights Reserved

CPU = 1 Processors Detected, Cores per Processor = 2
Intel(R) Xeon(R) CPU           C3528  @ 1.73GHz
Testing RAM
512MB RAM tested
6144MB RAM installed
256 KB L2 Cache per Processor Core
4096K L3 Cache Detected
System BIOS shadowed
USB 2.0: MICRON eUSB DISK
BIOS is scanning PCI Option ROMs, this may take a few seconds...
 +++++++++++++++++++


Boot Loader version 4.1
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2011 NetApp

CPU Type: Intel(R) Xeon(R) CPU           C3528  @ 1.73GHz
LOADER-A> boot_ontap
Loading X86_64/freebsd/image2/kernel:0x100000/8450520 0x90f1d8/1278704 Entry at 0x801585d0
Loading X86_64/freebsd/image2/platform.ko:0xa48000/653264 0xb8d8e8/692592 0xae77e0/39304 0xc36a58/42192 0xaf1168/86252 0xb06254/63752 0xb15b60/140448 0xc40f28/158856 0xb38000/2016 0xc67bb0/6048 0xb387e0/304 0xc69350/912 0xb38910/1680 0xc696e0/5040 0xb38fa0/960 0xc6aa90/2880 0xb39360/184 0xc6b5d0/552 0xb39420/448 0xb64de0/12918 0xb8d7f8/237 0xb68058/83952 0xb7c848/69552
Starting program at 0x801585d0
NetApp Data ONTAP 8.1.2P2 7-Mode
Copyright (C) 1992-2012 NetApp.
All rights reserved.
md1.uzip: 26368 x 16384 blocks
md2.uzip: 4608 x 16384 blocks
*******************************
*                             *
* Press Ctrl-C for Boot Menu. *
*                             *
*******************************
Cluster monitor: warning: firmware partner-sysid variable is not set
Oct 14 18:37:16 [localhost:netif.linkUp:info]: Ethernet e1b: Link up.
Oct 14 18:37:16 [localhost:netif.linkUp:info]: Ethernet e1a: Link up.
Oct 14 18:37:17 [localhost:diskown.isEnabled:info]: software ownership has been WAabled for this system
Oct 1FL4 18:37 C:17 [loPLcalhostED:dcs.frGameworkE.enableRd:info] i: The Ds CS framenework iabs enablleed on td.his nod e.
OChct 14 1e8:37:17c [localklhost:coisnfig.notPartner =Disks:C RITICAL0]: No dx7i this nfre dete84cted fo1fr the pfartner;
       ode will be unable to takeover correctly
Oct 14 18:37:17 [localhost:callhome.dsk.config:warning]: Call home for DISK CONFIGURATION ERROR
Oct 14 18:37:17 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig'. The full command line is 'ifconfig lo 127.0.0.1'.
Oct 14 18:37:17 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv losk 127.0.20.1'.
Oct 14 18:37:17 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full command line is 'ifconfig_priv lo 0'.
Oct 14 18:37:17 [localhost:kern.cli.cmd:debug]: Command line input: the command is 'ifconfig_priv'. The full commanPANIC  : raid: there are no data or parity disks
version: 8.1.2P2: Wed Feb 20 19:58:27 PST 2013
conf   : x86_64
cpuid = 0
Uptime: 38s

PANIC: raid: there are no data or parity disks in SK process rc on release 8.1.2P2 on Wed Oct 14 18:37:18 GMT 2015

version: 8.1.2P2: Wed Feb 20 19:58:27 PST 2013
compile flags: x86_64
Writing panic info to HA mailbox disks.
HA: current time (in sk_msecs) 18067 (in sk_cycles) 391029278789
DUMPCORE: START
No eligible disks found

DUMPCORE: END -- coredump *NOT* written.
Dumpcore failed
coredump: primary dumper failed -1.
coredump: trying secondary dumper...
no tftp server ip specified
netdump: no targets available to dump
coredump: secondary dumper failed -1.
Logging shutdown event to the SP...
System halting...
cpu_reset called on cpu#0

Phoenix SecureCore(tm) Server
Copyright 1985-2008 Phoenix Technologies Ltd.
All Rights Reserved
BIOS version: 8.1.0
Portions Copyright (c) 2008-2011 NetApp, Inc. All Rights Reserved

CPU = 1 Processors Detected, Cores per Processor = 2
Intel(R) Xeon(R) CPU           C3528  @ 1.73GHz
Testing RAM
512MB RAM tested
6144MB RAM installed
256 KB L2 Cache per Processor Core
4096K L3 Cache Detected
System BIOS shadowed
USB 2.0: MICRON eUSB DISK
BIOS is scanning PCI Option ROMs, this may take a few seconds...
 +++++++++++++++++++


Boot Loader version 4.1
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2011 NetApp

CPU Type: Intel(R) Xeon(R) CPU           C3528  @ 1.73GHz
LOADER-A>

  

2 REPLIES 2

hariprak
Hi, For installation and setup instructions for FAS 2220/FAS2240 system please refer below link, https://library.netapp.com/ecm/ecm_download_file/ECMP1149275 For SAS disk shelves, universal SAS and ACP cabling guide refer, https://library.netapp.com/ecm/ecm_get_file/ECMM1280392 Thanks
If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.

jelsco

It is not possiable to use only ACP, correct? They eithey have to be connected with SAS or SAS+ACP?

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public