FAS and V-Series Storage Systems Discussions

Highlighted

fas-2020 re-setup from scratch

Hi,

I have a decommissioned FAS-2020, i want to re-setup the storage, (new ip, new luns). for test purpose.

i want to know how to go about it, i don't see any reset button .

anybody can guide me.

pls help.

thanks

1 REPLY 1
Highlighted

Re: fas-2020 re-setup from scratch

if the idea is to initialize all from scratch

- Connect through BMC.

- Switch in console mode.

- Reboot, During boot press ctrl-C

- Clean configuration and initialize all disks.

Regards,

François

~~~~~~~~~~~~~~~~

LOADER-A> boot_ontap

Loading x86_64/freebsd/image1/kernel:.....0x100000/8455008 0x910360/1278312 Entry at 0x80158990

Loading x86_64/freebsd/image1/platform.ko:.0xa49000/655152 0xb97c40/694752 0xae8f40/39656 0xc41620/43152 0xaf2a28/86316 0xb07b54/63858 0xb174e0/140640 0xc4beb0/159120 0xb39a40/2024 0xc72c40/6072 0xb3a228/304 0xc743f8/912 0xb3a358/1680 0xc74788/5040 0xb3a9e8/960 0xc75b38/2880 0xb3ada8/184 0xc76678/552 0xb3ae60/448 0xb6f000/12918 0xb97b53/237 0xb72278/84120 0xb86b10/69699

Starting program at 0x80158990

NetApp Data ONTAP 8.1.4P1 7-Mode

Copyright (C) 1992-2014 NetApp.

All rights reserved.

md1.uzip: 25536 x 16384 blocks

md2.uzip: 5760 x 16384 blocks

*******************************

*                             *

* Press Ctrl-C for Boot Menu. *

*                             *

*******************************

^CBoot Menu will be available.

Please choose one of the following:

(1) Normal Boot.

(2) Boot without /etc/rc.

(3) Change password.

(4) Clean configuration and initialize all disks.

(5) Maintenance mode boot.

(6) Update flash from backup config.

(7) Install new software first.

(8) Reboot node.

NetApp Insights To Action
All Community Forums