NetApp Release 7.3.6P2 (FAS3020c)
I'm having trouble starting the FCP. It says "fcp start: Partner WWNN must match local WWNN to start FCP".
This system used to be a cluster but has been decommissioned recently and moved to PreProd environment. There's only one Disk shelf (DS14MK2 FC) connected to the controller (Stand-alone)
Here's the current setup:
*>fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
0a initiator CONFIGURED. online
0b initiator CONFIGURED online
0c target CONFIGURED offline
0d target CONFIGURED offline
0a is connected to ESH Module A
0b is connected to ESH Module B
0c is connected to a SAN Fabric
0d is connected to a SAN Fabric
I entered into "Special Boot Menu" and chose "4a" to initialize the entire system but still it didn't let me start the FCP. I even tried changing the "nodename", after adding the FCP license (KB ID: 2013604) I tried with the below config too,
0a is connected to ESH Module A
0c is connected to a SAN Fabric
0d is connected to a SAN Fabric
Nothing made a difference. Any suggestions?
I can't follow KB ID: 2010727, as I don't have access to the partner controller anymore.
https://library.netapp.com/ecmdocs/ECMM1278252/html/cluster/failing_over/task/t_oc_fo_mng-unconfig-hw.html#t_oc_fo_mng-unconfig-hw - This didn't work either.