Hi all,
last week we add a new network adapter to the netapp filers fas 2240 with HA Pair ( OnTap 8.2.3 P4) on e1a (10g). I do this on both filer.
e0a: flags=0x9f4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:36:7e (auto-1000t-fd-up) flowcontrol full
trunked vif_lan
e0b: flags=0x9f4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:36:7e (auto-1000t-fd-up) flowcontrol full
trunked vif_lan
e0c: flags=0x9f0c867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:36:7f (auto-1000t-fd-up) flowcontrol full
trunked vif_san
e0d: flags=0x9f0c867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:36:7f (auto-1000t-fd-up) flowcontrol full
trunked vif_san
e1a: flags=0x1f4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,LRO> mtu 1500
inet 192.168.10.229 netmask 0xffffff00 broadcast 192.168.10.255
ether 00:a0:98:56:ff:5e (auto-10g_sr-fd-up) flowcontrol full
e1b: flags=0x170c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,LRO> mtu 1500
ether 00:a0:98:56:ff:5f (auto-unknown-down) flowcontrol full
e0M: flags=0x2b0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,MGMT_PORT> mtu 1500
ether 00:a0:98:53:36:83 (auto-100tx-fd-up) flowcontrol full
e0P: flags=0x2b4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,ACP_PORT> mtu 1500 PRIVATE
inet 192.168.0.248 netmask 0xfffffc00 broadcast 192.168.3.255 noddns
ether 00:a0:98:53:36:82 (auto-100tx-fd-up) flowcontrol full
lo: flags=0x1b48049<UP,LOOPBACK,RUNNING,MULTICAST,TCPCKSUM> mtu 9188
inet 127.0.0.1 netmask 0xff000000 broadcast 127.0.0.1
losk: flags=0x40a400c9<UP,LOOPBACK,RUNNING> mtu 9188
inet 127.0.20.1 netmask 0xff000000 broadcast 127.0.20.1
vif_lan: flags=0x22f4c863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
inet 192.168.4.231 netmask 0xffffff00 broadcast 192.168.4.255
partner vif_lan (not in use)
ether 02:a0:98:53:36:7e (Enabled interface groups)
vif_san: flags=0x26f4c863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,NOWINS> mtu 1500
inet 192.168.10.231 netmask 0xffffff00 broadcast 192.168.10.255
partner vif_san (not in use)
ether 02:a0:98:53:36:7f (Enabled interface groups)
partner
e0a: flags=0x9f4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:2b:4e (auto-1000t-fd-up) flowcontrol full
trunked vif_lan
e0b: flags=0x9f4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:2b:4e (auto-1000t-fd-up) flowcontrol full
trunked vif_lan
e0c: flags=0x9f0c867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:2b:4f (auto-1000t-fd-up) flowcontrol full
trunked vif_san
e0d: flags=0x9f0c867<BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
ether 02:a0:98:53:2b:4f (auto-1000t-fd-up) flowcontrol full
trunked vif_san
e1a: flags=0x1f4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,LRO> mtu 1500
inet 192.168.10.230 netmask 0xffffff00 broadcast 192.168.10.255
ether 00:a0:98:56:ca:3c (auto-10g_sr-fd-up) flowcontrol full
e1b: flags=0x170c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,LRO> mtu 1500
ether 00:a0:98:56:ca:3d (auto-unknown-down) flowcontrol full
e0M: flags=0x2b0c866<BROADCAST,RUNNING,MULTICAST,TCPCKSUM,MGMT_PORT> mtu 1500
ether 00:a0:98:53:2b:53 (auto-100tx-fd-up) flowcontrol full
e0P: flags=0x2b4c867<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,ACP_PORT> mtu 1500 PRIVATE
inet 192.168.3.25 netmask 0xfffffc00 broadcast 192.168.3.255 noddns
ether 00:a0:98:53:2b:52 (auto-100tx-fd-up) flowcontrol full
lo: flags=0x1b48049<UP,LOOPBACK,RUNNING,MULTICAST,TCPCKSUM> mtu 9188
inet 127.0.0.1 netmask 0xff000000 broadcast 127.0.0.1
losk: flags=0x40a400c9<UP,LOOPBACK,RUNNING> mtu 9188
inet 127.0.20.1 netmask 0xff000000 broadcast 127.0.20.1
vif_lan: flags=0x22f4c863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM> mtu 1500
inet 192.168.4.232 netmask 0xffffff00 broadcast 192.168.4.255
partner vif_lan (not in use)
ether 02:a0:98:53:2b:4e (Enabled interface groups)
vif_san: flags=0x26f4c863<UP,BROADCAST,RUNNING,MULTICAST,TCPCKSUM,NOWINS> mtu 1500
inet 192.168.10.232 netmask 0xffffff00 broadcast 192.168.10.255
partner vif_san (not in use)
ether 02:a0:98:53:2b:4f (Enabled interface groups)
Now the netapp support side shows me a risk:
Missconfigured ifconfig entries in /etc/rc
The partner in rc is missing from the configuration of the acitve interface for e1a.
There is a kb with this risk:
https://kb.netapp.com/support/index?page=content&id=2011411&actp=LIST_RECENT&viewlocale=en_US&searchid=1411062323461
Now i will configure the e1a for the rc file:
netapp03> rdfile /etc/rc
hostname netapp03
vif create multi vif_lan e0a e0b
vif create multi vif_san e0c e0d
ifconfig vif_lan `hostname`-vif_lan netmask 255.255.255.0 mtusize 1500 partner vif_lan
ifconfig vif_san `hostname`-vif_san netmask 255.255.255.0 mtusize 1500 -wins partner vif_san
route add default 192.168.4.1 1
routed on
savecore
ifconfig e1a `hostname`-e1a netmask 255.255.255.0 trusted -wins partner e1a
but now i have the messge:
netapp03-e1a: bad value
netapp03-e1a: not found.
Can anyone help me to unterstand this error?
Greetings
Stefan