Netapp Powershell Report Script for Systeminfo

[sudoline]

Hi All,

I need some help for a powershell script. I like to do a report for some Netapp Clusters to receive Information about Name,Ip,Location, Nodes, Nodes IP mgmt ip , aso. and all helpfull stuff

How can I extract this data, and the best way would be to do this in a biger foreach loop with multible clusters..

$myCol = @()

Connect-NaController $clusters -Credential $ControllerCredential

[System.Array]$Nodes = Get-NcNode
Foreach($Node in $Nodes){

$x = "" | Select Node,Model,NodeSerialNumber,NodeSystemId,Version,IP

$x.Node = $Node.Node
$x.model = $Node.NodeModel
$x.NodeSerialNumber = $Node.NodeSerialNumber
$x.NodeSystemId = $Node.NodeSystemId
$x.Version = $Node.ProductVersion.Split(":")[0]
$x.IP = $Node | Get-NcNetInterface -Role node_mgmt | select Address

$mycol += $x

}

$mycol

[donny_lang · Accepted solution]

Yep, that is basically how I would do it for multiple clusters (just another foreach loop that will loop through all nodes in all clusters). If you have huge clusters with a lot of nodes, you may want to look into the -Query parameter for Get-NcNode, which can help limit the amount of properties that you collect (since you are filtering it with Select-Object later in the code anyways) and should help your code run faster. 

When I ran your code in my lab, the line that returns the node management interface returned the IPs of all the node's node-mgmt IPs for each entry in the output, so I rewrote it - other than that, everything looks like it worked as expected! 

$myCol = @()
Connect-NcController $clusters -Credential $ControllerCredential
[System.Array]$Nodes = Get-NcNode

Foreach($Node in $Nodes){
$x = "" | Select Node,Model,NodeSerialNumber,NodeSystemId,Version,IP

$x.Node = $Node.Node
$x.model = $Node.NodeModel
$x.NodeSerialNumber = $Node.NodeSerialNumber
$x.NodeSystemId = $Node.NodeSystemId
$x.Version = $Node.ProductVersion.Split(":")[0]
$x.IP = Get-NcNetInterface -Role node_mgmt | ? HomeNode -eq $node.Node | select Address
$mycol += $x
}

$mycol

As to how to extract it, you could export the data to a CSV with Export-Csv, format the output as a table (or HTML, or an email attachment) and send it with Send-MailMessage. Lots of options there. 

[sudoline]

hey thanks

that helps!

i'm struggling now with the 2én  loop

$clusters = "cl01" ,"cl02"

foreach($cluster in $clusters)
{

Connect-NcController $cluster -Credential $ControllerCredential
[System.Array]$Nodes = Get-NcNode

$myCol = @()
Foreach($Node in $Nodes){
$x = "" | Select Cluster,ClusterIP,Node,NodeIP,Location, NodeSerialNumber,NodeSystemId,Model,Version

$x.Cluster = $Node.ncController.Name
$x.ClusterIP = $Node.ncController.Address
$x.Node = $Node.Node
$x.NodeIP = Get-NcNetInterface -Role node_mgmt | ? HomeNode -eq $node.Node | select -ExpandProperty address
$x.model = $Node.NodeModel
$x.Location = $Node.NodeLocation
$x.NodeSerialNumber = $Node.NodeSerialNumber
$x.NodeSystemId = $Node.NodeSystemId
$x.Version = $Node.ProductVersion.Split(":")[0]

}
$mycol += $x


}
$mycol

[donny_lang]

You have the creation of the empty array inside the foreach loop so it is re-creating it each time it loops:

$myCol = @()

If you move it outside of the loop (to the 2nd line of your code, for example) the output will look better. 

[sudoline]

yeh you right.

do you know how to pimp the script and get more information for each node like

dns settings

gateway

lifs

aggregates

[donny_lang]

DNS settings:

This is per-SVM - Use "Get-NcNetDns"

Gateway:

Use "Get-NcNetRoute" 

LIFs:

"Get-NcNetInterface" will return lots of LIF information

Aggregates:

"Get-NcAggr" 

You may already know this, but just in case someone else takes a look at this thread, here are two commands/tricks that are super useful when looking for new cmdlets or trying to get very specific data from them: 

1. Get-Member 

You can pipe a command to Get-Member to see all of the available properties that are returned by the cmdlet. This helps if you want to set up a query or a select statement to only return relevant data.

2. Get-Command 

If I'm searching through a giant module (like the PSTK with 2300+ cmdlets) to see if I can get a particular piece of data from it, I will use something like "Get-Command -Module DataONTAP -Name *route*" to get an idea if there are commands that might be a good fit for what I'm looking for and at least help me narrow the search. 

[James_BGRS]

I have modified the script a little bit and make it working!!!

#Get-NetAppSystemInfo2.ps1
$ControllerCredential = Get-Credential
$clusters = 'cluster01',''cluster02',''cluster03',''cluster04'

$myCol = @()
foreach($cluster in $clusters)
{

Connect-NcController $cluster -Credential $ControllerCredential
[System.Array]$Nodes = Get-NcNode

Foreach($Node in $Nodes){

$x = "" | Select Cluster,ClusterIP,Node,NodeIP,Location, NodeSerialNumber,NodeSystemId,Model,Version

$x.Cluster = $Node.ncController.Name
$x.ClusterIP = $Node.ncController.Address
$x.Node = $Node.Node
$x.NodeIP = Get-NcNetInterface -Role node_mgmt | ? HomeNode -eq $node.Node | select -ExpandProperty address
$x.model = $Node.NodeModel
$x.Location = $Node.NodeLocation
$x.NodeSerialNumber = $Node.NodeSerialNumber
$x.NodeSystemId = $Node.NodeSystemId
$x.Version = $Node.ProductVersion.Split(":")[0]
$mycol += $x
}

}
$mycol

[GidonMarcus]

Hi.

First notice that you are using both the NA and NC cmdlets, is you using ONTAP 9/Cluster mode, use NC only.

Now to fully enjoy the power of PowerShell I would try to avoid recreating new objects, and avoid loops where I can, this allows PowerShell to do it's magic, and use parallelism when issuing a command (depend on the developer of the cmdlet).

The way I did the same script:

$ControllerCredential = Get-Credential
$clustersNames = 'cluster1','cluster2' 
$clustersObj = connect-NcController $clustersNames -Credential $ControllerCredential
$MgmtLifObj = Get-NcNetInterface -Controller $clustersObj -Role node_mgmt
$NodesObj = Get-NcNode -Controller $clustersObj
$NodesObj | select Node,Model,NodeSerialNumber,NodeSystemId,Version,@{Label="IP";expression={($MgmtLifObj | ? CurrentNode -eq $_.Node).Address}} | ft 

Just for fun I run both scripts for one cluster in Measure-command {....} | ft TotalMilliseconds . The version above did it in 620 Mill, and the one you provided in 733. Not a big difference and I don't know what exactly took there longer (running Get-NcNetInterface twice, building new arrays etc) - but was interesting to check before I commented here.

To be honest, I might have taken two different approaches altogether.

1. try to use ONTAP rest API instead of the PS Module, I didn't see NetApp saying it yet - but I think that will be the standard way going forward, and learning how to fiddle with raw rest API's (in any scripting language) will do very good for your general non-vendor-specific skillset, and technically allow you to use more standardized tools and deployment environments where the ONTAP PS Module cannot be installed (Containers, PS for Linux, CI/CD tools).

2. if you have OCUM/AIUM - use that rest API for faster results (as it's already stores all the clusters data), and a bit more safe as you reading read-only source rather a production cluster .

https://docs.netapp.com/ocum-97/index.jsp?topic=%2Fcom.netapp.doc.onc-um-api-dev%2FGUID-6C4A78C2-9F22-4723-B190-FA227CD067FD.html&cp=2_4_2_0