Network Storage Protocols Discussions
Hello from Berlin !
I am new here, and I have a problem installing iscsi with netapp. Maybe, general Problem My system: two nodes with oracle Linux 6.5
When I run discovery, it seems to be ok:
# iscsiadm -m discovery -t st -p 10.40.30.246:3260 –login 10.40.30.246:3260,2001 iqn.1992-08.com.netapp:sn.2014386705
But result of:
#iscsiadm -m node -T iqn.1992-08.com.netapp:sn.201438670 -p 10.40.30.246 –l iscsiadm: No records found
in the /var/log/messages I find when I restart service:
#service iscsi restart
Feb 17 12:21:26 dbb-n15-01 iscsid: Connection2:0 to [target: iqn.1992-08.com.netapp:sn.2014386705, portal: 10.40.30.246,3260] through [iface: default] is shutdown.
Feb 17 12:21:26 dbb-n15-01 kernel: scsi5 : iSCSI Initiator over TCP/IP
Feb 17 12:21:27 dbb-n15-01 iscsid: Could not set session3 priority. READ/WRITE throughout and latency could be affected.
Feb 17 12:21:27 dbb-n15-01 iscsid: Connection3:0 to [target: iqn.1992-08.com.netapp:sn.2014386705, portal: 10.40.30.246,3260] through [iface: default] is operational now
Maybe a newbie problem, but I hope you can help me
Thanks a lot
See The Solution
What is the configuration on the filer look like in terms of assigning LUNs to those servers via iSCSI?
thanks for your Answer The LUNS are in a inititator group RAC_N15, cause I want to use them as
raw devices. Maybe there is a little bit more I have to do ? We use Oracle 11g, but for a new project Oracle 12c (with asm)
Greetings from Berlin
the problem is fixed:
we had to add the InitiatorName to the igroup
View solution in original post