Network and Storage Protocols

Oplocks and Roaming/Mandatory Profiles

edombroski
5,702 Views

Hello,

We recently migrated a Windows file server to a vfiler running on a pair of FAS3160s (OnTAP 7.3.1.1P7). After performing the cutover, we noticed extremely poor login performance for our XP lab workstations that are using mandatory (read-only) roaming profiles.  We were seeing errors such as this: [cifs.oplock.break.timeout:warning]: CIFS: An oplock break request to station aaa.bbb.ccc.ddd() for filer VFILER, share Profiles, file \ProfilePath\Application Data\blah\blahblah\blah.xml has timed out, and through Performance Advisor noticed that the 'other_latency' counter spiked extremely (>100,000 microseconds) high on the volume hosting the profiles qtree.  Read/Write latency, however, was low/negligible.

Despite everything we've heard about oplocks *improving* performance, we disabled oplocks for the Profiles qtree, and the performance problems immediately ceased.

We're wondering:

1) If anyone else has come across a similar problem and

2) What 'other_latency' really means through Performance Advisor

Thanks!

-Eric

3 REPLIES 3

nigellevy
5,702 Views

Hi,

I have experienced similar issues to those you described and found that the following hotfix resolved;

Access to a redirected folder or a home drive disconnects regularly on a computer that is running Windows Server 2008 R2 and Windows 7

http://support.microsoft.com/kb/981872

I have also had issues with NetApp filers replacing Windows servers with the same name when folder redirections and offline folders were already in use then I have had to reinitialise the offline file cache due to clients randomly disconnecting and reconnecting, and appearing to lose documents.

Hope this helps

-Nigel

ianaforbes
5,702 Views

Hi edombroski. I'm seeing the same things as you. Did you find out what the other_latency was? Is performence now good with oplocks disabled?

shaunjurr
5,702 Views

You are also running about a 2 year old release (albeit with some patches).  You might want to check the fixed bugs list against a release of a bit newer vintage... You can find release comparisons for bugs on the NOW site... should be 500 or so fixed since 7.3.1.1 ...

Public