Assigning disk to cluster after disk replacement

[Odnap1104]

Hello NetApp Community,

Pardon the ignorance. We have cluster netapp 8.3P1 and one disk failed. It has been replaced but the disk is showwing as unnassign. I am not so sure what command/syntax to use to assign it back to the cluster.

clu01::> storage disk show -container-type unassigned

                     Usable              Disk   Container Container
Disk                   Size Shelf Bay    Type        Type      Name    Owner
---------------- ---------- ----- --- ------- ----------- --------- --------
3.5.9                     -     5   9    FCAL  unassigned -         -

clu01::> system node run -node clu01-01 -command disk show -n

DISK         OWNER         POOL  SERIAL NUMBER HOME          DR HOME
------------ ------------- ----- ------------- ------------- -------------
4d.89        Not Owned     NONE  XXXXXXXXXXXXX

Getting confused which disk to use when assigning the disk. is it 3.5.9 or the 4d.89?

Thank you in advance...

[notermanjeroen · Accepted solution]

Hi,

It's best to use the cluster commands if they are available, please try the following command:

disk assign -disk 3.5.9 -node clu01-01

Kind regards.

[Odnap1104]

Hi notermanjeroen,

Thanks for the command but got an error:

Error: command failed: With -disk input, nodename must not be specified. The nodename is only used for storage disk
assign with -auto or -all input.

I have replaced the -node with -owner clu01-01 and seems to work! 

Thanks!