Monitoring vscan on CDOT

[PHILIPALBERT]

Hi,

Is it possible to monitor vscan using OnCommand Unified Manager or with the Ontap Powershell toolkit?

We are running Data ONTAP 8.3.2

Thanks

[NAYABSK · Accepted solution]

Hi Philip,

Yes we do have command on powershell 

PS C:\Toolkit\3.1>  Get-NcCommand -Category vscan

Name                                Category        Family               Api

----                                --------        ------               ---

Disable-NcVscan                     vscan           {vserver}            {vscan-status-modify}

Disable-NcVscanOnAccessPolicy       vscan           {vserver}            {vscan-on-access-policy-modify}

Enable-NcVscan                      vscan           {vserver}            {vscan-status-modify}

Enable-NcVscanOnAccessPolicy        vscan           {vserver}            {vscan-on-access-policy-modify}

Get-NcVscanConnection               vscan           {cluster, vserver}   {vscan-connection-status-all-get-iter}

Get-NcVscanConnectionStats          vscan           {cluster, vserver}   {vscan-connection-extended-stats-get-iter}

Get-NcVscanOnAccessPolicy           vscan           {cluster, vserver}   {vscan-on-access-policy-get-iter}

Get-NcVscanScannerPool              vscan           {cluster, vserver}   {vscan-scanner-pool-get-iter}

Get-NcVscanScannerPoolActive        vscan           {cluster, vserver}   {vscan-active-scanner-pool-get-iter}

Get-NcVscanStatus                   vscan           {cluster, vserver}   {vscan-status-get-iter}

New-NcVscanOnAccessPolicy           vscan           {vserver}            {vscan-on-access-policy-create}

New-NcVscanScannerPool              vscan           {vserver}            {vscan-scanner-pool-create}

Remove-NcVscanOnAccessPolicy        vscan           {vserver}            {vscan-on-access-policy-delete}

Remove-NcVscanScannerPool           vscan           {vserver}            {vscan-scanner-pool-delete}

Reset-NcVscan                       vscan           {vserver}            {vscan-reset}

Set-NcVscanOnAccessPolicy           vscan           {vserver}            {vscan-on-access-policy-modify}

Set-NcVscanScannerPool              vscan           {vserver}            {vscan-scanner-pool-modify}

Thanks,

Nayab

****If my reply helped you to solve your issue, Please help to mark it as solutuion to help others****

[PHILIPALBERT]

I was looking for the vscan events, it's not documented but the command Get-NcVscanEvents is available.

Thanks Nayab

[NAYABSK]

Also for OCUM monitoring check this link http://community.netapp.com/t5/OnCommand-Storage-Management-Software-Discussions/Does-OnCommand-allow-to-monitor-AV-scanning/m-p/81242#M16905

Thx,

Nayab

[PHILIPALBERT]

Hi Nayab,

That's for an old version of OCUM. Is there something more up do date, we are using version 6.4.

Thanks

[NAYABSK]

Hey Philip, 

Right now i don't have access to the OCUM may be you can check from the counters you should be able to find vscan option.... Let me know.

Thanks,

Nayab