I have just replaced a failed disk (5c.23.11) in one of our FAS6210. The disk was owned by controller 1 at the time. Once the disk was replaced after a minute are so, the amber led comes on and the disk cannot be seen in the cLi (disk show, vol status -s / -f etc). Logged onto system manager and it shows as a partner disk on both controllers? There were 2 failed disks at the time. The first replaced ok. I have also tried 3 new disks.
NetApp Release 8.2.3P3 7-Mode
BIR-NETAPP01> disk show 1c.23.11 -------------------->> (now labled as 1c.23.11) DISK OWNER POOL SERIAL NUMBER HOME DR HOME
BIR-NETAPP01> disk show -n disk show: No unassigned disks