ONTAP Hardware
- Home
- :
- ONTAP, AFF, and FAS
- :
- ONTAP Hardware
- :
- Re: Fiber Channel Port [LINK NOT CONNECTED]
ONTAP Hardware
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I have a dua-chassis HA system,
The model is fas3220,
Node-A perform FC,
and Node-B perform CIFS,
When I config all the system,
I test the HA function,
When I use the command [cf takeover] in node-B,
it takeover success,
but my windows can't see the lun in windows disk manager!
I go to see the hardware,
and found that the fc port(0c and 0d) led is not light!
when I use the command [sysconfig -a],
I see the 0c and 0d is <LINK NOT CONNECTED>!
and I found the Host Port Addr is 000000
if use the [fcp config],
and it show [LINK NOT CONNECTED <ADAPTER UP>]
I see the port on the san switch,
NASB> sysconfig -a
Data ONTAP Release 8.1.3P3 7-Mode: Sun Sep 22 22:29:18 PDT 2013
System ID: 2018635319 (NASB); partner ID: 2018635377 (NASA)
System Serial Number: (NASB)
System Rev: B0
System Storage Configuration: Single-Path HA
System ACP Connectivity: Partial Connectivity
slot 0: System Board 2.3 GHz (System Board XVI B0)
Model Name: NAS
Machine Type:
Part Number: 111-01333
Revision: B0
Serial Number: 9448934956
BIOS version: 5.2.1
Loader version: 3.4
Processors: 4
Processor ID: 0x1067a
Microcode Version: 0xa0b
Processor type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
Memory Size: 12288 MB
Memory Attributes: Bank Interleaving
Hoisting
Rank Interleaving
Chipkill ECC
NVMEM Size: 1600 MB of Main Memory Used
CMOS RAM Status: OK
Service Processor Status: Online
Firmware Version: 1.3.3
Mgmt MAC Address: 00:A0:98:5A:FF:82
Ethernet Link: up, 100Mb, full duplex, auto-neg complete
Using DHCP: yes
IPv4 configuration:
IP Address: unknown
Netmask: unknown
Gateway: unknown
IPv6 configuration: Disabled
slot 0: Dual 10G Ethernet Controller T320E-SFP/KR
Device Type: CT-FE-3
Version Number: T3-SRAM1.1.0-BR1016-02-01-FW7.7.209-DR04
Serial Number: jb04050693
c0a MAC Address: 00:a0:98:5a:ff:7e (auto-10g_twinax-fd-up)
c0b MAC Address: 00:a0:98:5a:ff:7f (auto-10g_twinax-fd-up)
memory mapped I/O base 0xde801000, size 0x1000
memory mapped I/O base 0xde000000, size 0x800000
memory mapped I/O base 0xde800000, size 0x1000
slot 0: Internal BGE 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:5a:ff:80 (auto-100tx-fd-up)
e0P MAC Address: 00:a0:98:5a:ff:81 (auto-100tx-fd-up)
Device Type: BCM5721
memory mapped I/O base 0xdf800000, size 0x10000
memory mapped I/O base 0xdf900000, size 0x10000
slot 0: Dual 10/100/1000 Ethernet Controller G20
e0a MAC Address: 00:a0:98:5a:ff:7c (auto-1000t-fd-up)
e0b MAC Address: 00:a0:98:5a:ff:7d (auto-1000t-fd-up)
Device Type: Rev 6
memory mapped I/O base 0x00000000df720000, size 0x20000
memory mapped I/O base 0x00000000df700000, size 0x20000
I/O base 0x0000000000003000, size 0x20
memory mapped I/O base 0x00000000df760000, size 0x20000
memory mapped I/O base 0x00000000df740000, size 0x20000
I/O base 0x0000000000003020, size 0x20
slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev: 01.11.07.00
Base WWN: 5:00a098:00364ea:d8
Phy State: [0] Enabled, 6.0 Gb/s
[1] Enabled, 6.0 Gb/s
[2] Enabled, 6.0 Gb/s
[3] Enabled, 6.0 Gb/s
QSFP Vendor: Molex Inc.
QSFP Part Number: 112-00177+A0
QSFP Type: Passive Copper 2m ID:01
QSFP Serial Number: 408720174
02.0 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4DDSP)
02.1 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4GWPP)
02.2 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4PE1P)
02.3 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4LDNP)
02.4 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4K6KP)
02.5 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4689P)
02.6 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4GWRP)
02.7 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J467YP)
02.8 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J466VP)
02.9 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J5053P)
02.10: NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J4WVNP)
02.11: NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J5044P)
02.12: NETAPP X306_HMRKP02TSSA NA00 1695.4GB 512B/sect (P6J504GP)
03.0 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1277461)
03.1 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1272876)
03.2 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1274858)
03.3 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1274741)
03.4 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1274793)
03.5 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1273338)
03.6 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1271576)
03.7 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1272160)
03.8 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1273637)
03.9 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1274446)
03.10: NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1272310)
03.11: NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1277264)
03.12: NETAPP X306_WKOJN02TSSA NA01 1695.4GB 512B/sect (WD-WCC1P1275875)
Shelf 2: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
Shelf 3: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
slot 0: SAS Host Adapter 0b (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev: 01.11.07.00
Base WWN: 5:00a098:00364ea:dc
Phy State: [4] Enabled, 6.0 Gb/s
[5] Enabled, 6.0 Gb/s
[6] Enabled, 6.0 Gb/s
[7] Enabled, 6.0 Gb/s
QSFP Vendor: Molex Inc.
QSFP Part Number: 112-00177+A0
QSFP Type: Passive Copper 2m ID:00
QSFP Serial Number: 408720161
00.0 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMJHWF)
00.1 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGNZ2NF)
00.2 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGG3YAM)
00.3 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGNZ67F)
00.4 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGJ7V4R)
00.5 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGNYTGF)
00.6 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGNZ2JF)
00.7 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMRH8M)
00.8 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMU9NM)
00.9 : NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMW1PM)
00.10: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMT8XM)
00.11: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMSGYM)
00.12: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGKNH0M)
00.13: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGK33SR)
00.14: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMRPDM)
00.15: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGL17AM)
00.16: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGEX0XR)
00.17: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMSYMM)
00.18: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGEJHVM)
00.19: NETAPP X422_HCOBE600A10 NA00 560.0GB 520B/sect (KWGMJ4UF)
01.0 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0OCFUZ6)
01.1 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0NJFUZ6)
01.2 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0MRFUZ6)
01.3 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A058FUZ6)
01.4 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0MBFUZ6)
01.5 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A055FUZ6)
01.6 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0LMFUZ6)
01.7 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0L4FUZ6)
01.8 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0KOFUZ6)
01.9 : NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44O0A0N7FUZ6)
01.10: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A05BFUZ6)
01.11: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A06YFUZ6)
01.12: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44M0A05RFUZ6)
01.13: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44M0A0ELFUZ6)
01.14: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A0AXFUZ6)
01.15: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A05JFUZ6)
01.16: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44M0A0EBFUZ6)
01.17: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A04ZFUZ6)
01.18: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44N0A09JFUZ6)
01.19: NETAPP X422_TAL13600A10 NA01 560.0GB 520B/sect (44M0A0E3FUZ6)
Shelf 0: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
Shelf 1: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
memory mapped I/O base 0xdf530000, size 0x10000
memory mapped I/O base 0xdf520000, size 0x10000
memory mapped I/O base 0x00000000df510000, size 0x10000
memory mapped I/O base 0x00000000df500000, size 0x10000
slot 0: Fibre Channel Target Host Adapter 0c
(QLogic 2432 (2462) rev. 2, <LINK NOT CONNECTED>)
Firmware rev: 5.5.2
Host Port Addr: 000000
FC Nodename: 50:0a:09:80:88:31:ee:71 (500a09808831ee71)
FC Portname: 50:0a:09:81:98:31:ee:71 (500a09819831ee71)
Connection: No link
Switch Port: Unknown
SFP Vendor Name: FINISAR CORP.
SFP Vendor P/N: FTLF8524P2BNV
SFP Vendor Rev: A
SFP Serial No.: PQS1F0P
SFP Connector: LC
SFP Capabilities: 1, 2, 4 Gbit/Sec
I/O base 0x0000000000002000, size 0x100
memory mapped I/O base 0xdf600000, size 0x4000
slot 0: Fibre Channel Target Host Adapter 0d
(QLogic 2432 (2462) rev. 2, <LINK NOT CONNECTED>)
Firmware rev: 5.5.2
Host Port Addr: 000000
FC Nodename: 50:0a:09:80:88:31:ee:71 (500a09808831ee71)
FC Portname: 50:0a:09:82:98:31:ee:71 (500a09829831ee71)
Connection: No link
Switch Port: Unknown
SFP Vendor Name: FINISAR CORP.
SFP Vendor P/N: FTLF8524P2BNV
SFP Vendor Rev: A
SFP Serial No.: PQR1XQU
SFP Connector: LC
SFP Capabilities: 1, 2, 4 Gbit/Sec
I/O base 0x0000000000002400, size 0x100
memory mapped I/O base 0xdf604000, size 0x4000
slot 0: Intel ICH USB EHCI Adapter u0a (0xdfa01400)
boot0 Micron Technology Real SSD eUSB 2GB, class 0/0, rev 2.00/11.10, addr 2 1936MB 512B/sect (B8F0022700288919)
memory-mapped I/O base 0xdfa01400, size 0x400
slot 1: FC Host Adapter 1a (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e94
FC Port Name: 2:100:0024ff:730e94
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A6CX
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdee00000, size 0x4000
memory mapped I/O base 0xdec00000, size 0x100000
slot 1: FC Host Adapter 1b (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e95
FC Port Name: 2:100:0024ff:730e95
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A69L
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdee04000, size 0x4000
memory mapped I/O base 0xded00000, size 0x100000
slot 1: FC Host Adapter 1c (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e96
FC Port Name: 2:100:0024ff:730e96
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A6CV
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdf100000, size 0x4000
memory mapped I/O base 0xdef00000, size 0x100000
slot 1: FC Host Adapter 1d (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e97
FC Port Name: 2:100:0024ff:730e97
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A6D1
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdf104000, size 0x4000
memory mapped I/O base 0xdf000000, size 0x100000
slot 2: FCVI Host Adapter 2a (QLogic 2532(2562) rev. 2, unknown, <DOWN>)
Physical link: DOWN
FC Node Name: 21:00:00:24:ff:58:4f:58
Firmware rev: 5.3.140 Serial No: BFD1408T29623
Host Port Id: 0xffffffff
Cacheline size: 8 FC Packet size: 2048
SFP Vendor: FINISAR CORP.
SFP Part Number: FTLF8528P3BCV-QL
SFP Serial Number: PR11JG5
SFP Capabilities: 2, 4 or 8 Gbit
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdf200000, size 0x4000
slot 2: FCVI Host Adapter 2b (QLogic 2532(2562) rev. 2, unknown, <DOWN>)
Physical link: DOWN
FC Node Name: 21:00:00:24:ff:58:4f:59
Firmware rev: 5.3.140 Serial No: BFD1408T29623
Host Port Id: 0xffffffff
Cacheline size: 8 FC Packet size: 2048
SFP Vendor: FINISAR CORP.
SFP Part Number: FTLF8528P3BCV-QL
SFP Serial Number: PR224BN
SFP Capabilities: 2, 4 or 8 Gbit
I/O base 0x00000000ffffff00, size 0x100
memory mapped I/O base 0xdf204000, size 0x4000
NASB>
NASB>
NASB>
NASB>
NASB>
NASB>
NASB> sysconfig -a v
Data ONTAP Release 8.1.3P3 7-Mode: Sun Sep 22 22:29:18 PDT 2013
System ID: 2018635319 (NASB); partner ID: 2018635377 (NASA)
System Serial Number: 2858C2513F009111 (NASB)
System Rev: B0
System Storage Configuration: Single-Path HA
System ACP Connectivity: Partial Connectivity
slot 0: System Board 2.3 GHz (System Board XVI B0)
Model Name: NAS
Machine Type:
Part Number: 111-01333
Revision: B0
Serial Number: 9448934956
BIOS version: 5.2.1
Loader version: 3.4
Processors: 4
Processor type: Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
Memory Size: 12288 MB
Memory Attributes: Bank Interleaving
Hoisting
Rank Interleaving
Chipkill ECC
NVMEM Size: 1600 MB of Main Memory Used
CMOS RAM Status: OK
Service Processor Status: Online
Firmware Version: 1.3.3
Mgmt MAC Address: 00:A0:98:5A:FF:82
Ethernet Link: up, 100Mb, full duplex, auto-neg complete
Using DHCP: yes
IPv4 configuration:
IP Address: unknown
Netmask: unknown
Gateway: unknown
IPv6 configuration: Disabled
slot 0: Dual 10G Ethernet Controller T320E-SFP/KR
Device Type: CT-FE-3
Version Number: T3-SRAM1.1.0-BR1016-02-01-FW7.7.209-DR04
Serial Number: jb04050693
c0a MAC Address: 00:a0:98:5a:ff:7e (auto-10g_twinax-fd-up)
c0b MAC Address: 00:a0:98:5a:ff:7f (auto-10g_twinax-fd-up)
slot 0: Internal BGE 10/100 Ethernet Controller
e0M MAC Address: 00:a0:98:5a:ff:80 (auto-100tx-fd-up)
e0P MAC Address: 00:a0:98:5a:ff:81 (auto-100tx-fd-up)
Device Type: BCM5721
slot 0: Dual 10/100/1000 Ethernet Controller G20
e0a MAC Address: 00:a0:98:5a:ff:7c (auto-1000t-fd-up)
e0b MAC Address: 00:a0:98:5a:ff:7d (auto-1000t-fd-up)
Device Type: Rev 6
slot 0: SAS Host Adapter 0a (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev: 01.11.07.00
Base WWN: 5:00a098:00364ea:d8
Phy State: [0] Enabled, 6.0 Gb/s
[1] Enabled, 6.0 Gb/s
[2] Enabled, 6.0 Gb/s
[3] Enabled, 6.0 Gb/s
QSFP Vendor: Molex Inc.
QSFP Part Number: 112-00177+A0
QSFP Type: Passive Copper 2m ID:01
QSFP Serial Number: 408720174
ID Vendor Model FW Size
02.0 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.1 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.2 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.3 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.4 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.5 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.6 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.7 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.8 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.9 : NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.10: NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.11: NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
02.12: NETAPP X306_HMRKP02TSSA NA00 1695.4GB (3907029168 512B/sect)
03.0 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.1 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.2 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.3 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.4 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.5 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.6 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.7 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.8 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.9 : NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.10: NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.11: NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
03.12: NETAPP X306_WKOJN02TSSA NA01 1695.4GB (3907029168 512B/sect)
Shelf 2: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
Shelf 3: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
slot 0: SAS Host Adapter 0b (PMC-Sierra PM8001 rev. C, SAS, <UP>)
Firmware rev: 01.11.07.00
Base WWN: 5:00a098:00364ea:dc
Phy State: [4] Enabled, 6.0 Gb/s
[5] Enabled, 6.0 Gb/s
[6] Enabled, 6.0 Gb/s
[7] Enabled, 6.0 Gb/s
QSFP Vendor: Molex Inc.
QSFP Part Number: 112-00177+A0
QSFP Type: Passive Copper 2m ID:00
QSFP Serial Number: 408720161
ID Vendor Model FW Size
00.0 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.1 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.2 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.3 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.4 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.5 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.6 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.7 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.8 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.9 : NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.10: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.11: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.12: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.13: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.14: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.15: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.16: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.17: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.18: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
00.19: NETAPP X422_HCOBE600A10 NA00 560.0GB (1172123568 520B/sect)
01.0 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.1 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.2 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.3 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.4 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.5 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.6 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.7 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.8 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.9 : NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.10: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.11: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.12: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.13: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.14: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.15: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.16: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.17: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.18: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
01.19: NETAPP X422_TAL13600A10 NA01 560.0GB (1147307688 520B/sect)
Shelf 0: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
Shelf 1: IOM6 Firmware rev. IOM6 A: 0162 IOM6 B: 0162
slot 0: Fibre Channel Target Host Adapter 0c
(QLogic 2432 (2462) rev. 2, <LINK NOT CONNECTED>)
Firmware rev: 5.5.2
Host Port Addr: 000000
FC Nodename: 50:0a:09:80:88:31:ee:71 (500a09808831ee71)
FC Portname: 50:0a:09:81:98:31:ee:71 (500a09819831ee71)
Connection: No link
Switch Port: Unknown
SFP Vendor Name: FINISAR CORP.
SFP Vendor P/N: FTLF8524P2BNV
SFP Vendor Rev: A
SFP Serial No.: PQS1F0P
SFP Connector: LC
SFP Capabilities: 1, 2, 4 Gbit/Sec
slot 0: Fibre Channel Target Host Adapter 0d
(QLogic 2432 (2462) rev. 2, <LINK NOT CONNECTED>)
Firmware rev: 5.5.2
Host Port Addr: 000000
FC Nodename: 50:0a:09:80:88:31:ee:71 (500a09808831ee71)
FC Portname: 50:0a:09:82:98:31:ee:71 (500a09829831ee71)
Connection: No link
Switch Port: Unknown
SFP Vendor Name: FINISAR CORP.
SFP Vendor P/N: FTLF8524P2BNV
SFP Vendor Rev: A
SFP Serial No.: PQR1XQU
SFP Connector: LC
SFP Capabilities: 1, 2, 4 Gbit/Sec
slot 0: Intel ICH USB EHCI Adapter u0a (0xdfa01400)
boot0 Micron Technology Real SSD eUSB 2GB, class 0/0, rev 2.00/11.10, addr 2 1936MB 512B/sect (B8F0022700288919)
slot 1: FC Host Adapter 1a (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e94
FC Port Name: 2:100:0024ff:730e94
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A6CX
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
slot 1: FC Host Adapter 1b (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e95
FC Port Name: 2:100:0024ff:730e95
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A69L
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
slot 1: FC Host Adapter 1c (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e96
FC Port Name: 2:100:0024ff:730e96
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A6CV
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
slot 1: FC Host Adapter 1d (QLogic 2532 rev. 2, L-port, <OFFLINE (hard)>)
Board name: QLE2564
Serial Number: RFD1404U24554
Firmware rev: 5.4.130
Host Loop Id: 0
FC Node Name: 2:000:0024ff:730e97
FC Port Name: 2:100:0024ff:730e97
SFP Vendor: AVAGO
SFP Part Number: AFBR-57D9AMZ-QL
SFP Serial Number: AA13323A6D1
SFP Capabilities: 2, 4 or 8 Gbit
Link Data Rate: N/A
slot 2: FCVI Host Adapter 2a (QLogic 2532(2562) rev. 2, unknown, <DOWN>)
Physical link: DOWN
FC Node Name: 21:00:00:24:ff:58:4f:58
Firmware rev: 5.3.140 Serial No: BFD1408T29623
Host Port Id: 0xffffffff
Cacheline size: 8 FC Packet size: 2048
SFP Vendor: FINISAR CORP.
SFP Part Number: FTLF8528P3BCV-QL
SFP Serial Number: PR11JG5
SFP Capabilities: 2, 4 or 8 Gbit
slot 2: FCVI Host Adapter 2b (QLogic 2532(2562) rev. 2, unknown, <DOWN>)
Physical link: DOWN
FC Node Name: 21:00:00:24:ff:58:4f:59
Firmware rev: 5.3.140 Serial No: BFD1408T29623
Host Port Id: 0xffffffff
Cacheline size: 8 FC Packet size: 2048
SFP Vendor: FINISAR CORP.
SFP Part Number: FTLF8528P3BCV-QL
SFP Serial Number: PR224BN
SFP Capabilities: 2, 4 or 8 Gbit
NASB>
NASB>
NASB>
NASB>
NASB>
NASB>
NASB> fcp config
0c: LINK NOT CONNECTED <ADAPTER UP>
host address 000000
portname 50:0a:09:81:98:31:ee:71 nodename 50:0a:09:80:88:31:ee:71
mediatype auto speed auto
0d: LINK NOT CONNECTED <ADAPTER UP>
host address 000000
portname 50:0a:09:82:98:31:ee:71 nodename 50:0a:09:80:88:31:ee:71
mediatype auto speed auto
NASB>
NASB>
NASB>
NASB>
NASB> fcp topology show
Switches connected on adapter 0c:
None connected.
Switches connected on adapter 0d:
None connected.
NASB>
NASB>
NASB>
NASB>
NASB> fcp portname show
Portname Adapter
-------- -------
50:0a:09:81:98:31:ee:71 0c
50:0a:09:82:98:31:ee:71 0d
NASB>
NASB>
NASB>
NASB>
NASB> fcp nodename
Fibre Channel nodename: 50:0a:09:80:88:31:ee:71 (500a09808831ee71)
NASB>
NASB>
NASB>
NASB>
NASB>
NASB> fcp status
FCP service is running.
NASB>
NASB>
NASB>
NASB>
NASB>
NASB>
NASB> fcp wwpn-alias show
NASB>
NASB>
NASB>
NASB>
NASB>
NASB> fcadmin config
Local
Adapter Type State Status
---------------------------------------------------
0c target CONFIGURED online
0d target CONFIGURED online
1a initiator CONFIGURED. offline
1b initiator CONFIGURED. offline
1c initiator CONFIGURED. offline
1d initiator CONFIGURED. offline
NASB>
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Are relevant ports on FC switch enabled? Did you try removing / reinserting / using different FC cables?
Regards,
Radek
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi radek :
The switch port is enable,
but when I plug the cable,
it will become U port,
and the enable and disable button can't be click(diable)!
I have chang many FC Cable,
I event switch the other Controller,
change the owner ship the other controller,
and plug all the cable!
but the same!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Is it 8Gbit switch by any chance? Google search suggests port going into U-state may be related to speed auto-negotiation issues.
Try setting the port speed on the switch to 4Gbit.
Other than that, you may try swapping SFPs around & see what happens.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi Radek：
This way I have try,
but can't finish!
And the partner controller is also 4Gb,
but it working normally!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
have you accidentally forgotten to start (or license) fcp on the second node?
fcp start
fcp status
license
