Channel: 0a
Shelf: 12
SES device path: local access: 3a.12.99
Module type: IOM3; monitoring is active
Shelf status: unrecoverable condition
SES Configuration, shelf 12:
logical identifier=0x50050cc102019c11
vendor identification=NETAPP
product identification=DS4243
product revision level=0211
Vendor-specific information:
Product Serial Number: SHU0954292N08CS
Status reads attempted: 4151217; failed: 0
Control writes attempted: 0; failed: 0
Shelf bays with disk devices installed:
23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
with error: none
Power Supply installed element list: 1, 2, 3, 4; with error: 1
Power Supply information by element:
[1] Serial number: PMW82562005794C Part number: 0082562-12
Type: 9C
Firmware version: 0311 Swaps: 0
[2] Serial number: PMW82562005791D Part number: 0082562-12
Type: 9C
Firmware version: 0311 Swaps: 0
[3] Serial number: PMW82562005793B Part number: 0082562-12
Type: 9C
Firmware version: 0311 Swaps: 0
[4] Serial number: PMW825620057946 Part number: 0082562-12
Type: 9C
Firmware version: 0311 Swaps: 0
Voltage Sensor installed element list: 1, 3, 4, 5, 6, 7, 8; with error: none
Shelf voltages by element:
[1] 3.05 Volts Normal voltage range
[2] Unavailable
[3] 5.01 Volts Normal voltage range
[4] 12.02 Volts Normal voltage range
[5] 5.01 Volts Normal voltage range
[6] 12.02 Volts Normal voltage range
[7] 5.01 Volts Normal voltage range
[8] 12.03 Volts Normal voltage range
Current Sensor installed element list: 1, 2, 3, 4, 5, 6, 7, 8; with error: none
Shelf currents by element:
[1] 660 mA Normal current range
[2] 540 mA Normal current range
[3] 4600 mA Normal current range
[4] 6750 mA Normal current range
[5] 3320 mA Normal current range
[6] 9680 mA Normal current range
[7] 3080 mA Normal current range
[8] 6950 mA Normal current range
Powersupply shows with error: 1.
System has 4nos power supplies. How many Powersupply failure does this Shelf can withstand. If so in what order.
Please explain how redundancy is planned in Powersupply
Thank you
