OnCommand Storage Management Software Discussions

NetApp Harvest Graphite Issue

[root@host tmp]# /opt/netapp-harvest/netapp-manager
Usage: /opt/netapp-harvest/netapp-manager {-status|-start|-stop|-restart|-import|-export} [-poller <str>] [-group <str>] [-conf <str>] [-confdir <str>] [-logdir <str>] [-h] [-v] continues…

 

I am getting an error 'command not found"  when I tried to run above command. Can someone please help.

3 REPLIES

Re: NetApp Harvest Graphite Issue

Hi @chinonye

 

It would seem that your initial installation of Harvest was not succesful because if it was then that command would work!

 

I would follow the installation steps again, preferably using the rpm or deb packages to install.

 

Alternatively, if you want an all-in-one solution download an OVA with a management GUI from here: https://nabox.tynsoe.org/

 

 

Cheers,
Chris Madden

Solution Architect - 3rd Platform - Systems Engineering NetApp EMEA (and author of Harvest)

Blog: It all begins with data

 

If this post resolved your issue, please help others by selecting ACCEPT AS SOLUTION or adding a KUDO or both!

 

Re: NetApp Harvest Graphite Issue

do you have the netapp-harvest code installed in that same location @chinonye

 

looks like the shell is not able to locate the application you are trying to execute.

Re: NetApp Graphite Issue

Hi Madden,

I am trying to install grafana on linux box. I had followed Graphite_Grafana_Quick_Start_v1.4 while configuring. Later, I was able to login to grafana home page, however while adding data source, the test was unsuccessful and getting error like HTTP Error Not found.

Forums