Active IQ Unified Manager Discussions

Netapp Harvest/NA Box not polling capacity svm

Zerolimit
5,967 Views

NAbox 2.5.1b (2019-02-22) Visit Web Page

Debian GNU/Linux 8 (jessie) (8.11) Visit Web Page

NetApp SDK v9.5 installed Visit Web Page (NetApp Login Required)
Harvest v1.4.2 installed Visit Web Page (NetApp Login Required)
Grafana v5.4.3 installed Visit Web Page
Graphite v1.2.0 installed Visit Web Page

Elasticsearch 5.6.15 installed. Visit Web Page
Logstash 1:5.6.15-1 installed. Visit Web Page

API Key : Reveal | Create a new key

 

I upgraded from 2.4.2 and i have tried fresh install of 2.5.1b and im unable to poll netapp capacity metrics for svm.  Has anyone run into this issue.

10 REPLIES 10

vachagan_gratian
5,886 Views

Hi Zerolimit,

 

Did you look in your OCUM poller logs? Any warnings or errors there?

yannb
5,751 Views

You probably didn't configure OCUM poller. For capacity information, you need to have OCUM installed and configure it in NAbox.

 

If you just configure your cluster you will only get performance metrics.

Zerolimit
5,697 Views

OCUM is configured and running. In the logs i see this  the errors below. 

[2019-03-14 18:46:03] [WARNING] [volume] update failed with reason: Timeout. Could not read API response.
[2019-03-14 18:46:03] [WARNING] [volume] data-list update failed.

yannb
5,692 Views

Interesting.

 

Are you sure that NAbox can communicate with OCUM over port 443 ?

 

If the answer is yes, any time I had a similar issue it was solved by an OCUM reboot...

Zerolimit
5,690 Views

Once in a while i would have to restart the OCUM services. I thought it was an upgrade issue when we upgrade NAbox from 2.4 to 2.5x but that was not the case.  I also setup an entirely new instance on 2.5.1b and it still has the same issues.  It is communicating over 443 to our OUCM instance it as performance data is being pulled in.  

yannb
5,666 Views

So you’re saying restarting OCUM fixes the issue ?

Zerolimit
5,606 Views

in the past that used to work.

vachagan_gratian
5,565 Views

Hi Zerolimit,

It seems like Harvest is getting late responses from your OCUM system. What you can do is change the default timeout parameter in Harvest and seek help from support for the OCUM API response time.

 

You can manually edit netapp-worker to change the default timeout setting. This file is usually located in the folder /opt/netapp-harvest/. You can use vim or nano to edit the file.

 

On line 612 you should see this:

        $out = $s->set_timeout('60');

Change 60 to 180, save and restart Harvest. If it doesn't help, try again by setting it to 300.

RajeshPanda
5,491 Views

@Zerolimit  following up to see if you got a chance to look into the recommndeation provided , Lte me know if you are still looking for help.

amozen
5,038 Views

I have exactly the same error. Can someone provide info for the fix. Communication between NAbox and OCUM via port 443 is working. Increasing timeout to 180 seconds didn't help.

Public