Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Oncommand and SIM 8.1 RC 1 7 Mode. Volumes are not shown in Oncommand
2012-02-22
03:43 PM
- Bookmark
- Permalink
- Email to a Friend
- Report Inappropriate Content
Data Onta
8.1 RC1 Netapp Simulator 7 Mode does not show volumes in Oncommand 5.0 Ops
Manger neither in Performance Manager. Performance Object on LUN does not show
any value in PerfM. All other objects are shown. Aggr are shown …..
At least with 8.01 this was with OPS Mgr 4.0 working. Any idea ? DFM host diag is ok !
View By:
2 REPLIES 2
Re: Oncommand and SIM 8.1 RC 1 7 Mode. Volumes are not shown in Oncommand
2012-02-22
06:21 PM
- Bookmark
- Permalink
- Email to a Friend
- Report Inappropriate Content
HI,
Assuming that you have done the following:
1. set the host credentials in OnCommand.
2. can you paste the host diag output here.
3. Check if there are any monitoring errors in dfmmonitor.log ---> find this in "/opt/NTAPdfm/log/dfmmonitor.log" (equivalent location in windows).
Thanks,
Arun
Re: Oncommand and SIM 8.1 RC 1 7 Mode. Volumes are not shown in Oncommand
2012-02-27
12:49 AM
- Bookmark
- Permalink
- Email to a Friend
- Report Inappropriate Content
Hi
OK, to be simple, I did just reinstalled all OnCommand and now is working. Still quite strange as all other 7.3 Sim where working and as well on 8.1 sim aggr where shown. But now ok.
Juerg