Active IQ Unified Manager Discussions

What triggers eventtype vfiler-discovered?

smurphy
4,331 Views
1 ACCEPTED SOLUTION

msaravan
4,331 Views

Hi,

Probably, the vFilers might have been discovered a long time ago. By

default, the vFiler monitor runs on hourly basis for each Storage

system. As you are managing the storage system successfully for more

than a year, the vFilers of this storage system might have been

discovered already if they were exist.

So, the corresponding event "vFiler Discovered" should have gone to

"History" and further it might have been purged from your DB if the

"Events Purge Interval" is set to default (25.71 weeks).

If you want to see this event now, probably you can perform one of the

following tasks :

=> Create a new vFiler @ your storage system. Wait for an hour and look

at "vFiler Discovered" event in DFM.

or

=> Delete the existing vFiler from DFM DB and wait for an hour. DFM will

discover this when its next vFilerMon runs.

Note : The later one is not suggested if it is a production environment.

You can push the discovery on-demand using "dfm host discover

<storage_system>" if you dont want to wait for the periodic vFilerMon

kick off.

Regards,

Saravanan

View solution in original post

7 REPLIES 7

adaikkap
4,331 Views

Hi Sean,

      The specified event is triggered when a vFiler is discovered on a hosting filer

Regards

adai

smurphy
4,331 Views

smurphy
4,331 Views

I've run dfm host discover for both the hosting filer as well as the vfiler and no event of this type has been logged.  Does host discovery also need to be enabled?

adaikkap
4,331 Views

Discovery of vfiler requires credentilas of the hosting filer.

Is your credentilas of the hosting filer set ?

Regards

adai

smurphy
4,331 Views

Yes, the hosting filer has been in the environment and managed/monitored by DFM for well over a year.

msaravan
4,332 Views

Hi,

Probably, the vFilers might have been discovered a long time ago. By

default, the vFiler monitor runs on hourly basis for each Storage

system. As you are managing the storage system successfully for more

than a year, the vFilers of this storage system might have been

discovered already if they were exist.

So, the corresponding event "vFiler Discovered" should have gone to

"History" and further it might have been purged from your DB if the

"Events Purge Interval" is set to default (25.71 weeks).

If you want to see this event now, probably you can perform one of the

following tasks :

=> Create a new vFiler @ your storage system. Wait for an hour and look

at "vFiler Discovered" event in DFM.

or

=> Delete the existing vFiler from DFM DB and wait for an hour. DFM will

discover this when its next vFilerMon runs.

Note : The later one is not suggested if it is a production environment.

You can push the discovery on-demand using "dfm host discover

<storage_system>" if you dont want to wait for the periodic vFilerMon

kick off.

Regards,

Saravanan

shailaja
4,331 Views

>> I've run dfm host discover for both the hosting filer as well as the vfiler and no event of this type has been logged.  Does host discovery also need to be enabled?

- Are there any vFilers on the hosting filer that are not yet discovered by OpsManager in your environment.? If so, please give more details.

- By host discovery, I assume you mean the option "discoverEnabled". This need not be enabled for vFilers to be discovered on an already discovered

hosting filer.

However, there is a separate option named "discoverVfilers" that needs to be enabled for vFiler discovery.

Please check whether it is enabled in "dfm option list".

>> Yes, the hosting filer has been in the environment and managed/monitored by DFM for well over a year.

This event is generated on the vFiler that is discovered as an Informational event.

Have you checked the following::

"dfm report view events-history <vfiler-id> | grep -i discover" for a discovered vFiler, to see if the event is present.

Thanks,
Shailaja


Public