OnCommand Storage Management Software Discussions

adding storage systems to dfm

how do I add netapp systems to the dfm server without discovering the whole subnet? I want to do it by selectively entering the ip addresses of the systems

25 REPLIES

adding storage systems to dfm

you can add individual storage systems wit the command "dfm snmp add -m 26 -v "snmp_version eg:1" -c "ro community of NetApp Filer" "Filer IP Addr"

adding storage systems to dfm

Hi TDUBB1234

You can do it via the CLI using:

dfm host add <hostname | IP Address>

or

via the GUI

> Click on the Control Center Tab

> Home

> Member Details Tab (In Group Summary)

> At the bottom you should see a dialogue for Add New Storage System

Enter your IP Address or Hostname there

Kind regards

Rich

Re: adding storage systems to dfm

how do i disable the scanning of the whole subnet?

adding storage systems to dfm

Scanning of Subnet happens only wen you initiate it...

Re: adding storage systems to dfm

its a brand new dfm server installed. I think by default it scans the entire subnet on intervals. I want to disable that and only add the ip addresses of the storage systems

Re: adding storage systems to dfm

Click Setup > Discovery >

Disable Network Discovery

Re: adding storage systems to dfm

should it be snmp v1 or 2?

Re: adding storage systems to dfm

rle Netapp Alumni

SNMPv1

Re: adding storage systems to dfm

do I have to change the trap locations on the systems to the dfm server?

Forums