Images in Profile (sree)

cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Images in Profile (sree)

Album Privacy: Public

Profile (sree)

  • Photo on 9-29-17 at 9.58 AM #2.jpg
  • CIS.png
  • Lab1.png
  • Example 1.1: This example shows an option where one or more C220 servers are connected to Nexus 93180YC-FX switches with a converged (IP and FCoE) connection. A C220 M5 would contain either the VIC 1455 or 1457 at 10 or 25 Gbps. A C220 M4 would contain a VIC 1225 at 10 Gbps. The Nexus 93180YC-FX is used for both FC SAN and LAN switching. If the fully redundant configuration with vPC is used only one link to each switch (2 of the 4 ports on the VIC 1455/57) can be used since the links are carrying FCoE. Since the VIC FCoE is setup in the Cisco IMC on the server, initiator WWPNs could be queried programmatically in this configuration. Since this is a Tech Preview, it would be acceptable to use only one switch and one storage controller
  • Lab2.png
  • lab3.png
  • Widget2.png
  • Widget1.png
  • widget3.png
  • inventory.png
  • Monitor.png
  • Orrchestation.png
  • Minimum Intersight Tech Preview Configuration
  • This example shows an option where one or more C220 servers are connected to Nexus 93180YC-FX switches with a converged (IP and FCoE) connection. A C220 M5 would contain either the VIC 1455 or 1457 at 10 or 25 Gbps. A C220 M4 would contain a VIC 1225 at 10 Gbps. The Nexus 93180YC-FX is used for both FC SAN and LAN switching. If the fully redundant configuration with vPC is used only one link to each switch (2 of the 4 ports on the VIC 1455/57) can be used since the links are carrying FCoE. Since the VIC FCoE is setup in the Cisco IMC on the server, initiator WWPNs could be queried programmatically in this configuration. Since this is a Tech Preview, it would be acceptable to use only one switch and one storage controller.
  • This example is similar to the one in the previous slide, except instead of using FCoE from the VIC, a third-party FC card from Emulex or Qlogic (listed as supported in the C220 Spec Sheets) is used to connect the FC to the 93180YC-FX which is again used for both SAN and LAN switching. Since this is a Tech Preview, it would be acceptable to use only one switch and one storage controller.
  • In this example, an MDS switch is used for the FC switching. Because of this any Nexus switch that supports 10 or 25 Gbps interfaces can be used for the LAN switching. Again, since this is a Tech Preview, it would be acceptable to use only one switch and one storage controller.
  • image.png