Hello,

When i check the autosupport of my storage I noticed (FCP PARTNER PATH MISCONFIGURED) ERROR.
I readed some articles on NOW about this case, and i can't get nothing.

I changed the options of thresholds that control the trigger issued next lines:

Options lun.use_partner.cc.warn_limit 300
Options lun.use_partner.cc.bytes 2457600

And the fail continued.

I saw the config check in autosupport the follow WWPN:

===== LUN CONFIG CHECK =====  

The following FCP Initiators are sending Read/Write i/o over the
FCP Partner Paths during the last 304 seconds
WWPN                      Partner's Port       ops         bytes      ostype
21:00:00:24:ff:04:91:ed               0a    270993     522878976     windows

Offending OS: windows
Proxy ops exceeded 273 out of 300 times
Proxy bytes exceed 27 out of 300 times

Then, I displayed the status of adapters, and both are online.

> fcp show adapters
Slot:                    0a
Description:             Fibre Channel Target Adapter 0c (Dual-channel, QLogic 2432 (2462) rev. 2)
Adapter Type:            Local
Status:                  ONLINE

Slot:                    0b
Description:             Fibre Channel Target Adapter 0d (Dual-channel, QLogic 2432 (2462) rev. 2)
Adapter Type:            Local
Status:                  ONLINE

I checked then the MPIO, and the path status is Active.

I use DSM-MPIO native (2008R2)

What can i do now?

Thanks.