Network and Storage Protocols

How to configure UTA ports

avinchakov

Hello,

I have FAS2554, I want to use 2 UTA ports for 10GB (I connect to Cisco) and 2 UTA ports for 8 GB FC. How they are configured? How to me to set up NFS on 10GB?

slot 0: Fibre Channel Target Host Adapter 0c
                (QLogic 8324 (8362) rev. 2, <OFFLINED BY USER/SYSTEM>)
                Firmware rev:      7.2.0
                Flash rev:         2.1.0 
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:80:f0:e4:df (500a098080f0e4df)
                FC Portname:       50:0a:09:81:80:f0:e4:df (500a098180f0e4df)
                Connection:        No link
                Switch Port:       Unknown
                SFP Vendor Name:   CISCO-TYCO (Warning: SFP info not updated when port is OFFLINE)
		SFP Vendor P/N:    1-2053783-2
		SFP Vendor Rev:    T
		SFP Serial No.:    TED1913B40W
		SFP Connector:     Passive Copper
		SFP Capabilities:  10 Gbit/Sec
                        prefetchable memory base 0xdf208000, size 0x2000
                        prefetchable memory base 0xdf200000, size 0x4000
                        prefetchable memory base 0xdf000000, size 0x100000
        slot 0: Fibre Channel Target Host Adapter 0d
                (QLogic 8324 (8362) rev. 2, <OFFLINED BY USER/SYSTEM>)
                Firmware rev:      7.2.0
                Flash rev:         2.1.0 
                Host Port Addr:    000000
                FC Nodename:       50:0a:09:80:80:f0:e4:df (500a098080f0e4df)
                FC Portname:       50:0a:09:82:80:f0:e4:df (500a098280f0e4df)
                Connection:        No link
                Switch Port:       Unknown
                SFP Vendor Name:   CISCO-TYCO (Warning: SFP info not updated when port is OFFLINE)
		SFP Vendor P/N:    1-2053783-2
		SFP Vendor Rev:    T
		SFP Serial No.:    TED1913B45S
		SFP Connector:     Passive Copper
		SFP Capabilities:  10 Gbit/Sec
                        prefetchable memory base 0xdf20a000, size 0x2000
                        prefetchable memory base 0xdf204000, size 0x4000
                        prefetchable memory base 0xdf100000, size 0x100000
1 ACCEPTED SOLUTION

scottgelb

For 7-Mode.... note that port pairs must be the same... so a/b either cna or fc and c/d the same.

 

ucadmin show

ucadmin modify -m fc|cna -t target|initiator -f portname

ucadmin show

 

If cDOT (except maintenance mode use 7-Mode commands above)

system node unified connect show | modify

View solution in original post

4 REPLIES 4

scottgelb

For 7-Mode.... note that port pairs must be the same... so a/b either cna or fc and c/d the same.

 

ucadmin show

ucadmin modify -m fc|cna -t target|initiator -f portname

ucadmin show

 

If cDOT (except maintenance mode use 7-Mode commands above)

system node unified connect show | modify

View solution in original post

avinchakov

It works!

scottgelb

and reboot required to set the personality.

avinchakov

Thank I will try it

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public