I try to setup simulator test bed (sim 7.3.2) on my workplace; this is Vista in domain. I have no way to add simulator to this domain anyway, so it is setup over Vmware host-only interface using workgroup authentication. Unfortunately I am not able to connect to it - I always get password request from Vista interface. I verified using cifs.trace_login that connect request actually comes in and is accepted (i.e. windows user is mapped to valid Unix user). On Vista I see that system tries to connect to simulator but nothing more. I suspect the problem is actually on Vista side (some domain policy settings); I appreciate any hint what could it be. Thank you!
For the record (because it was something new to me).
First, I had problems accessing administrative shares (c$, etc$); I could access other shares. Sorry for not mentioning that.
Initially this simulator was setup using /etc/passwd authentication. In this mode administrative shares get set to no access at all:
ETC$ /etc Remote Administration ** priv access only **
only root or administrator on the filer may access the particular shares
As far as I can tell, that is true for all shares, except administrative shares. For these two particular shares I get the following behaviour:
if root volume is set to unix security, I cannot even connect to share, I always get password request
if root volume is set to ntfs security, I am able to connect but am not able to access directory in any way
I repeat - this happens only for c$ and etc$, only if security for etc$ and/or c$ is set to No Access which happens only if you configure filer to use password authentication. If filer is initially set to workgroup or better, access is automatically set to BUILTIN\Administrators Full Control. But part of problem is, re-running cifs setup does not change existing shares (unless you have deleted them), so even though I had changed filer to workgroup shares remained stuck in No Access mode.
So it looks like either a bug or some undocumented feature. If it works as intended, would be nice if someone updated ntapcs3954 to clearly state it.
did u enable the option 3 ...? during u filer installation steps........
when u enable option 3 & it will prompt to enter password this password can be use to share cifs from u r vm to the local windows vista box...
Selection (1-2)? : CIFS requires local /etc/passwd and /etc/group files and default files will be created. The default passwd file contains entries for 'root', 'pcuser', and 'nobody'. Enter the password for the root user : Retype the password: The default name for this CIFS server is 'SRIRAM'. Would you like to change this name? [n]: Data ONTAP CIFS services support four styles of user authentication. Choose the one from the list below that best suits your situation.
(1) Active Directory domain authentication (Active Directory domains only) (2) Windows NT 4 domain authentication (Windows NT or Active Directory domains) (3) Windows Workgroup authentication using the filer's local user accounts (4) /etc/passwd and/or NIS/LDAP authentication
Selection (1-4)? : 4 What is the name of the Workgroup? [WORKGROUP]: CIFS - Starting SMB protocol... Welcome to the WORKGROUP Windows(R) workgroup