Qtree to qtree Snapmirror with source and dest in vFilers.
The vFilers have static routes allowing them to see each other.
One qtree per volume, all qtrees within the vFiler are mirrored.
The Snapmiror initialize is defined with shortname and the respective destination shortname added to the vFiler hosts file.
Ping and traceroute work in both directions.
The Recover function is working perfectly in both directions, which validates a bunch of licensing and connectivity issues, but if I try to Reprotect after a failover, the new destination throws the following error every six seconds for 10 minutes then reaches the timeout;
[destfiler01:replication.dst.err:error]: SnapMirror: destination transfer from sydstdrvna99:/vol/acmgoldata01/data to /vol/acmgoldata01/data : cannot connect to source filer.
[destfiler01:replication.dst.resync.success:notice]: SnapMirror resync of /vol/acmgoldata01/data to sydstdrvna99:/vol/acmgoldata01/data was successful.
Thanks for the advice, but the destination vFiler (/vol/acmsys01/etc/snapmirror.conf) has the correct snapmirror.conf. The initialization phase appears to be failing, so any further updates are not successful.