ONTAP Hardware

FAS2040HA + 2x DS14mk2 + 1x DS4243: is it supported?

neves_jacques
2,293 Views

Good Morning,

Is It supported to connect on a FAS2040HA, 2x DS14mk2 and 1x DS4243 in order to move the data between the DS14mk2 / DS4243?

I don't see this configuration on the document "Configuration Rules and Examples for FAS20xx Systems" (215-03642_D0.pdf).

I wish to move the date from the aggregate on the 2x DS14mk2 to a new aggregate on the 1x DS4243.

I plan to remove the 2x DS14mk2 after the migration on the DS4243.

Thanks in advance for your feedback.

Regards,

JNV

1 ACCEPTED SOLUTION

baijulal
2,293 Views

DS4243 needed to attached to SAS port and  DS14mk2 (2 in one stack)to the FC port on the contoller.

It should work.

View solution in original post

2 REPLIES 2

baijulal
2,294 Views

DS4243 needed to attached to SAS port and  DS14mk2 (2 in one stack)to the FC port on the contoller.

It should work.

neves_jacques
2,293 Views

Thanks 😉

I have just done the intervention and it works.

Regards,

JNV

Public