Community maintenance is complete. Thank you for your patience!

ONTAP Hardware

FAS2554 UTA2 Ports SFP+ Module requirement

jackychen1985

Hello,

 

Have anyone know the Netapp FAS2554 UTA2 Ports have any specific requirement for the SFP+ module?(I means if I purchase one other brand SFP+ moudule, it is possible to comptiable with UTA2 ports?)

 

Thanks in advanced! 

1 REPLY 1

deepuj

Hi,

 

From Hardware universe :

 

The onboard UTA2 ports can be configured as FC Target/Initiator or CNA (FCoE target/Ethernet). The UTA2 ports are based on a dual port ASIC and both ports on each ASIC must be set to the same mode (enforced by Data ONTAP). Install X6589-R6 10GbE SFP+ modules or approved copper twinax cables when using in CNA (FCoE target/Ethernet) mode. Install X6596-R6 16Gb FC SFP+ module when using in FC Target/Initiator mode.

 

 

Thanks

If this post resolved your issue, help others by selecting ACCEPT AS SOLUTION or adding a KUDO.
Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public