ONTAP Hardware

LACP interface status : lag_inactive

MACAKIGO1

Hello All,

We stuck with investigation of one issue related with LACP 
One port is failing to receive successive LACP protocol packets and staying in lag_inactive status.
netapp controller is sending LACP packets but doesn't receiving them from the switch.
Same behavior we can see on network switch(PDUs sent are increasing , however received PDUs are staying in same value).

We tried to reset interface but it didn't help.
our environment
FAS: FAS6210
network card: 10 Gigabit Ethernet Controller IX1-SFP+
ontap version: 8.2.1 7-Mode

switch is running : 

Cisco Nexus Operating System (NX-OS) Software 5.2(7)


here is output from "vif status"
attached lacp_log file



ifgrp: command "vif" is deprecated in favor of command "ifgrp"
default: transmit 'IP Load balancing', Ifgrp Type 'multi_mode', fail 'log'
nas0: 1 link, transmit 'IP Load balancing', Ifgrp Type 'lacp' fail 'default'
Ifgrp Status Up Addr_set
up:
e0c: state up, since 28Nov2014 15:15:56 (48+23:04:26)
mediatype: auto-10g_sr-fd-up
flags: enabled
active aggr, aggr port: e0c
input packets 3239494, input bytes 4206978780
input lacp packets 619824, output lacp packets 620745
output packets 14182685, output bytes 20061316275
up indications 6, broken indications 0
drops (if) 0, drops (link) 0
indication: up at 28Nov2014 15:15:56
consecutive 0, transitions 6
lag_inactive:
e0e: state lag_inactive, since 16Jan2015 10:19:57 (04:00:25)
mediatype: auto-10g_sr-fd-up
flags: lacp enabled
input packets 0, input bytes 0
input lacp packets 351670, output lacp packets 8406748
output packets 0, output bytes 0
up indications 9, broken indications 6
drops (if) 0, drops (link) 0


ifstat  of affected interface

-- interface e0e (0 hours, 10 minutes, 7 seconds) --

RECEIVE
Frames/second: 0 | Bytes/second: 0 | Errors/minute: 0
Discards/minute: 11 | Total frames: 0 | Total bytes: 0
Total errors: 0 | Total discards: 117 | Multi/broadcast: 0
No buffers: 0 | Non-primary u/c: 0 | L2 terminate: 0
Tag drop: 0 | Vlan tag drop: 0 | Vlan untag drop: 0
Vlan forwards: 0 | Vlan broadcasts: 0 | Vlan unicasts: 0
CRC errors: 0 | Runt frames: 0 | Fragment: 0
Long frames: 0 | Jabber: 0 | Bus overruns: 117
Queue drop: 0 | Xon: 0 | Xoff: 0
Jumbo: 0
TRANSMIT
Frames/second: 0 | Bytes/second: 0 | Errors/minute: 0
Discards/minute: 61 | Total frames: 0 | Total bytes: 0
Total errors: 0 | Total discards: 618 | Multi/broadcast: 0
Queue overflows: 618 | No buffers: 0 | Xon: 0
Xoff: 0 | Jumbo: 0 | TSO non-TCP drop: 0
Split hdr drop: 0 | Pktlen: 0 | Timeout: 0
Timeout1: 0
LINK_INFO
Current state: up | Up to downs: 7 | Speed: 10000m
Duplex: full | Flowcontrol: none


Thanks 

1 ACCEPTED SOLUTION

MACAKIGO1

This issue has been resolved by takoover/giveback.

View solution in original post

2 REPLIES 2

MACAKIGO1

This issue has been resolved by takoover/giveback.

View solution in original post

RUDeBega

Having the LACP PDU issue which the article says is solved. The link for the solution appears not to work. What is the solution?

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public