I am trying to upgrade the firmware on some existing IOM6 modules in advance of re-purposing shelves on a FAS8200.
I have a current FAS8040 with DS2246 shelves with IOM6s. The FAS8040 is running 9.1P13. I installed the shelf and ACP firmware files. When I upgrade the firmware, the shelf firmware upgrades fine (the output of "sysconfig -a" shows the firmware at 0191). However, the ACP firmware status shows something I have not seen before:
::> storage shelf acp module show -instance
Node:node-01 Module Name: 1.0.B Adapter Name: 0a MAC Address: 00:a0:xx:xx:xx:xx IOM Type: iom6 Shelf Serial Number: 6000xxxxxx Protocol Version: 0.0.00.00 Firmware Version: 00.00 State: unsupported Last Contact: 502
Node: node-01 Module Name: 1.0.A Adapter Name: 0a MAC Address: 00:a0:xx:xx:xx:xx IOM Type: iom6 Shelf Serial Number: 6000xxxxxx Protocol Version: 0.0.00.00 Firmware Version: 00.00 State: firmware-update-required Last Contact: 502 2 entries were displayed.
I cannot find any documentation about what those state messages mean. The ACP firmware version shows 00.00. Has anyone tried to do this before? I want to get the firmware to a level where in-band ACP is supported so I can connect the shelves to the FAS8200.