Talk and ask questions about NetApp FAS and AFF series unified storage systems. Talk with other members how to optimize these powerful data storage systems.
Talk and ask questions about NetApp FAS and AFF series unified storage systems. Talk with other members how to optimize these powerful data storage systems.
I have an A200 in my home lab that the controller on side A will not power on. I am able to get to the BMC and look at the event logs and it appears the CPU is having issues. I removed the controller and heatsink, but it looks like the CPU is soldered directly on the motherboard. Can anyone confirm that is the case?
... View more
Hi, We have existing VNX storage connected to the Brocade SAN switches. (no free ports available on Brocade SAN Switches) We have procured new AFF400 and Cisco SAN switches. Our objective is to migrate the data from VNX to NetApp. Please help on how can we achieve this. Can ISL be done between OLD Brocade and New Cisco SAN switches. From VNX the LUN are mapped to Windows servers Viren
... View more
Hello. I have a question about the system manager. When I download the performance of the system manager, there are read, write, and other parts. However, the proportion of other in the IOPs portion of our customer's data is applied too large. What does the value of other mean? In addition, from which value can the latency value be considered to be delayed? When monitoring latency values, at what point should I tell the customer that it can affect them?
... View more
Hi, I was trying to locate information on the power requirements/typical draw for A900 controller and NS224 disk shelf so I can properly size the power feeds for the entire rack. All I was able to find in the available documentation is the combined power draw for a A900 configured with a single NS224 shelf? I'd really appreciate if anybody out there could share any info.
... View more
Need some help with a FAS2520 2-node switchless cluster. Since some time one of the nodes appears in red (node down) in OnCommandSystemManager. Here's some commands output that I've managed to run (I'm a NetApp newbie, hope these make sense):
ntapcl-bul-sf::*> cluster show Node Health Eligibility Epsilon -------------------- ------- ------------ ------------ ntapcl-bul-sf-01 false true false ntapcl-bul-sf-02 true true false 2 entries were displayed.
ntapcl-bul-sf::*> storage failover show Takeover Node Partner Possible State Description -------------- -------------- -------- ------------------------------------- ntapcl-bul-sf-01 ntapcl-bul-sf- - Unknown 02 ntapcl-bul-sf-02 ntapcl-bul-sf- false In takeover, Auto giveback deferred 01 2 entries were displayed. ntapcl-bul-sf::*>
ntapcl-bul-sf::*> network port show Warning: Unable to list entries for vifmgr on node "ntapcl-bul-sf-01": RPC: Couldn't make connection. Node: ntapcl-bul-sf-02 Ignore Speed(Mbps) Health Health Port IPspace Broadcast Domain Link MTU Admin/Oper Status Status --------- ------------ ---------------- ---- ---- ----------- -------- ------ a0a Default Default up 1500 auto/1000 healthy false e0M Default Default up 1500 auto/1000 healthy false e0a Default - up 1500 auto/1000 healthy false e0b Default - up 1500 auto/1000 healthy false e0c Default Default down 1500 auto/10 - false e0d Cluster Cluster up 9000 auto/10000 healthy false e0e Default Default down 1500 auto/10 - false e0f Cluster Cluster up 9000 auto/10000 healthy false 8 entries were displayed.
ntapcl-bul-sf::*> network interface show Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- Cluster ntapcl-bul-sf-01_clus1 up/- 169.254.49.169/16 ntapcl-bul-sf-01 e0f false ntapcl-bul-sf-01_clus2 up/- 169.254.163.32/16 ntapcl-bul-sf-01 e0f true ntapcl-bul-sf-02_clus1 up/up 169.254.87.210/16 ntapcl-bul-sf-02 e0d true ntapcl-bul-sf-02_clus2 up/up 169.254.190.147/16 ntapcl-bul-sf-02 e0f true SVM_AL SVM_AL-ISCSI-1 up/- 172.16.6.32/16 ntapcl-bul-sf-01 a0a true SVM_AL-ISCSI-2 up/up 172.16.6.33/16 ntapcl-bul-sf-02 a0a true SVM_AL-MGMT up/up 172.16.6.29/16 ntapcl-bul-sf-02 a0a true Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- SVM_AL SVM_AL-NFS-1 up/up 172.16.6.30/16 ntapcl-bul-sf-02 a0a false SVM_AL-NFS-2 up/up 172.16.6.31/16 ntapcl-bul-sf-02 a0a true SVM_BL SVM_BL-ISCSI-1 up/- 172.16.6.27/16 ntapcl-bul-sf-01 a0a true SVM_BL-ISCSI-2 up/up 172.16.6.28/16 ntapcl-bul-sf-02 a0a true SVM_BL-MGMT up/up 172.16.6.24/16 ntapcl-bul-sf-02 a0a false SVM_BL-NFS-1 up/up 172.16.6.25/16 ntapcl-bul-sf-02 a0a false SVM_BL-NFS-2 up/up 172.16.6.26/16 ntapcl-bul-sf-02 a0a true ntapcl-bul-sf ntapcl-bul-sf-01_mgmt1 up/- 172.16.6.20/16 ntapcl-bul-sf-01 e0M true Logical Status Network Current Current Is Vserver Interface Admin/Oper Address/Mask Node Port Home ----------- ---------- ---------- ------------------ ------------- ------- ---- ntapcl-bul-sf ntapcl-bul-sf-02_cluster_mgmt up/up 172.16.6.19/16 ntapcl-bul-sf-02 e0M false ntapcl-bul-sf-02_mgmt1 up/up 172.16.6.21/16 ntapcl-bul-sf-02 e0M true 17 entries were displayed. ntapcl-bul-sf::*>
I've tried to reboot the failed node from command line, but:
ntapcl-bul-sf::*> system node reboot -node ntapcl-bul-sf-01 Warning: Rebooting or halting node "ntapcl-bul-sf-01" in an HA-enabled cluster may result in client disruption or data access failure. To ensure continuity of service, use the "storage failover takeover" command. Are you sure you want to reboot node "ntapcl-bul-sf-01"? {y|n}: y Warning: Unable to list entries on node ntapcl-bul-sf-01. RPC: Couldn't make connection Error: command failed: RPC: Couldn't make connection
Looks like a communication issue, there is no ping to any of the IPs of the failed node - not from a workstation, not from the second node.
What would be the right thing to do next? Is it safe to turn the power off/on , or reconnect all network cables one by one? Or something else?
Thanks in advance for the help!
... View more
