ONTAP Hardware

problem with hw_assist

ANTONIO_SIMULA

Hi All,

I have a problem with setting up of "cf.ha_assist".

when try to start command cf.ha_assist test, i have this output:

cf hw_assist Error: No response from partner(XXXX), timed out.

i use the e0M interface for cf.ha_assist.

from the cf hw_assist status command i see this output:

Thu Jul 10 22:14:46 CEST [IXXX:cf.hwassist.Default.NodemgmtAddr:notice]: The system automatically chose 192.168.X.X as the local hardware-assist IP address. 

Thu Jul 10 22:15:07 CEST [XXX:cf.hwassist.socBindFailed:error]: hw_assist: bind failed to port 4444 on IP address 192.168.X.X Error 49

the netapp system is Fas2240-4 with data ontap 8.2.1

can you help me ?

thanks for support

Regards

Antonio


4 REPLIES 4

ANTONIO_SIMULA

Hi All, soory for delay,

follow the output of "options cf":

first node:

cf.giveback.auto.after.panic.takeover on        

cf.giveback.auto.cancel.on_network_failure on        

cf.giveback.auto.cifs.terminate.minutes 5         

cf.giveback.auto.delay.seconds 600       

cf.giveback.auto.enable      off       

cf.giveback.auto.override.vetoes off       

cf.giveback.check.partner    on        

cf.hw_assist.enable          off       

cf.hw_assist.partner.address 192.168.X.Y

cf.hw_assist.partner.port    4444      

cf.mode                      ha        

cf.remote_syncmirror.enable  off        (same value required in local+partner)

cf.sfoaggr_maxtime           120        (value might be overwritten in takeover)

cf.takeover.bypass_optimization off       

cf.takeover.change_fsid      on        

cf.takeover.detection.seconds 15        

cf.takeover.on_disk_shelf_miscompare off       

cf.takeover.on_failure       on        

cf.takeover.on_network_interface_failure on        

cf.takeover.on_network_interface_failure.policy all_nics   (same value in local+partner recommended)

cf.takeover.on_panic         on        

cf.takeover.on_reboot        off       

cf.takeover.on_short_uptime  on        

cf.takeover.use_mcrc_file    off 

second node:

cf.giveback.auto.after.panic.takeover on        

cf.giveback.auto.cancel.on_network_failure on        

cf.giveback.auto.cifs.terminate.minutes 5         

cf.giveback.auto.delay.seconds 600       

cf.giveback.auto.enable      off       

cf.giveback.auto.override.vetoes off       

cf.giveback.check.partner    on        

cf.hw_assist.enable          off       

cf.hw_assist.partner.address 192.168.X.Y

cf.hw_assist.partner.port    4444      

cf.mode                      ha        

cf.remote_syncmirror.enable  off        (same value required in local+partner)

cf.sfoaggr_maxtime           120        (value might be overwritten in takeover)

cf.takeover.bypass_optimization off       

cf.takeover.change_fsid      on        

cf.takeover.detection.seconds 15        

cf.takeover.on_disk_shelf_miscompare off       

cf.takeover.on_failure       on        

cf.takeover.on_network_interface_failure on        

cf.takeover.on_network_interface_failure.policy all_nics   (same value in local+partner recommended)

cf.takeover.on_panic         on        

cf.takeover.on_reboot        off       

cf.takeover.on_short_uptime  on        

cf.takeover.use_mcrc_file    off 

thanks

bhanojiraog7

please share the "options cf" command output.

JGPSHNTAP

I don't know your rc file setup, but whats wrong with using your filers vif ip

resqme914

Did you set up your SP properly?

Announcements
NetApp on Discord Image

We're on Discord, are you?

Live Chat, Watch Parties, and More!

Explore Banner

Meet Explore, NetApp’s digital sales platform

Engage digitally throughout the sales process, from product discovery to configuration, and handle all your post-purchase needs.

NetApp Insights to Action
I2A Banner
Public