ONTAP Hardware

replace new disk with error

wallanetapp
8,040 Views

Hi

thanks for you help

i just replace 1 disk of 3140 (DS14) with used disk and got this error

Tue Aug 12 14:42:38 IDT [newnetlan:fci.adapter.link.online:info]: Fibre Channel adapter 0a link online.

Tue Aug 12 14:42:38 IDT [newnetlan:fci.adapter.link.online:info]: Fibre Channel adapter 0b link online.

Tue Aug 12 14:42:50 IDT [newnetlan:disk.init.failureBytes:error]: Disk 0b.19 failed due to failure byte setting.

Tue Aug 12 14:42:51 IDT [newnetlan:sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.

the disk are the same model what can be the error?

thanks shai

1 ACCEPTED SOLUTION

wallanetapp
8,040 Views

i have done FW update and then unfaild the disk and insert to spares.

thanks a lot for all

View solution in original post

4 REPLIES 4

aborzenkov
8,040 Views

This means replacement disk was marked as failed in previous system. It is possible to unfail it in advanced mode, but there must be a reason why it was marked as failed in the first place.

wallanetapp
8,040 Views

thanks a lot

but after unfaild the disk and reassign it

i got this massage

Wed Aug 13 10:45:44 IDT [newnetlan:raid.config.disk.bad.label:error]: Disk 0b.19 Shelf 1 Bay 3 [NETAPP   X291_S15K6420F15 NA01] S/N [3QQ08ENH00009009HTAK] has bad label.

Wed Aug 13 10:45:44 IDT [newnetlan:callhome.dsk.label:CRITICAL]: Call home for DISK BAD LABEL

Wed Aug 13 10:45:44 IDT [newnetlan:disk.fw.downrevWarning:warning]: 1 disks have downrev firmware that you need to update.

Wed Aug 13 10:45:45 IDT [newnetlan:sfu.firmwareUpToDate:info]: Firmware is up-to-date on all disk shelves.

Wed Aug 13 10:46:00 IDT [newnetlan:monitor.globalStatus.nonCritical:warning]: Disk on adapter 0b, shelf 1, bay 3, failed.

what is DISK BAD LABEL ?

thanks shai

aborzenkov
8,040 Views

Please show output of “aggr status -f”

wallanetapp
8,041 Views

i have done FW update and then unfaild the disk and insert to spares.

thanks a lot for all

Public